Watch a video of the print here!

The Driller's Assistant is a nifty little 2-in-1 drill guide and dust collector. Rather than breaking out the vacuum to clean up after drilling, just use this tool to collect the mess while you work, making cleanup a breeze! When you're finished drilling, just slide open the bottom hatch to dispose of the gathered dust and shavings. It's even small enough to fit in most pockets so you can keep it close at hand while working.

Printing & Assembly Tips

I recommend using supports when printing the top half, mainly around where the drill hole is located. The other two parts don't need supports.

The slider has a thickness of 0.4mm so I recommend printing with 0.2mm layer height so it ends up only being two layers thick to help with flexibility.

To assemble, just position the slider in it's slot on the bottom half of the housing, apply a little glue to each peg, and press the two halves together.

Please like it if you do and leave any comments! If you're really feeling generous please consider buying me a coffee so I can keep creating!

Check out my TikTok!

Check out my YouTube!

If you like what you see, please consider joining my Patreon.