Hollow Knight Hueforge
Hollow Knight Hueforge
Print Profile(1)
Description
Hueforge Hollow Knight
Boost Me (for free)
Please give a boost if you like my work! It will encourages me to do more stuff. Thanks!
Description
Print at 100% infill with a layer height of 0.08mm with a initial layer of 0.16mm
The Model is 138x220mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
Filaments Used:
Sunlu PLA+ Black
GST3D PLA+ Blue
GST3D PLA+ Silver
Sunlu PLA Meta Taro Purple
Sunlu PLA+ White
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue
At layer #13 (1.12mm) swap to Silver
At layer #20 (1.68mm) swap to Light Purple
At layer #23 (1.92mm) swap to White for the rest.
How to print more than 4 colors with AMS Lite
example:
slot 1 - purple
slot 2 - black
slot 3 - grey
slot 4 blue
then assign the white to the slot 3 - grey , pay attention and after printing the grey replace to the white, then it will print the purple and after will return to the slot 3 grey but now is white. Hope this helps!
Note : If needed add a pause after finishing the purple color completely , so the spool purple can be replaced by the white.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)