Flaming Lamp by Stuart Makes Stuff

Stuart Makes Stuff

Household>Decor

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

5.5 h

2 plates

4.7(23)

Led Strip Adapter

Designer

2.4 h

1 plate

5.0(3)

No AMS pause in middle

Designer

5.4 h

2 plates

5.0(1)

Open in Bambu Studio

Boost

650

1328

435

167

Released

Description

This model comes in three main types of parts. The base and top piece, and the side panels. The panels slide into the bottom and you then have to put the top piece on. The lamp slides straight into the bottom piece and fits nicely. You will have to print the panel plate twice as i only designed two different sides since that's all you can see at once. This lamp is compatible with my cracked obsidian lamp, and lightning strike lamp. I am currently working on a bunch of other lamps to please feel free to follow me. If you liked this you Might like my other lamps too.

Boost Me (for free)

If you liked the model feel free to boost me.

Bill of Materials

Maker’s Supply Kits and Parts

LED Lamp Kit - MH001

$12.00 USD

MH001

× 1

Buy Now

Download BOM

Comment & Rating (49)

@PupsG

Boosted

love this, looks amazing and unique, I printed it with transparent red to let more light through, looks great. need a stronger flickering light tho lol, I'm glad I've made one and boosted this. thank you.

(Edited)

The designer has replied

@Stuart_M_S

thankyou so much and that filament makes it look awesome!

@PupsG

Boosted

I was wondering, am I supposed to glue it together??? lol silly question but I'm wondering

@Stuart_M_S

Replying to @PupsG :

Sorry for late reply I have not but you can. especially if the little bit of light leak in the corners bothers you some glue can help that.

@Sbreeguz

I have seen the new corner covering design, but I would adjust it to a more conventional structure like the one in the photo I sent you, similar to lithophanes. Then, I would like to ask how you secure the Lamp Kit 001; it’s loose and doesn’t fit snugly. In my opinion, you should create an internal base at the bottom where you can glue the lamp kit and ensure the cable exits cleanly

The designer has replied

Show original

@Stuart_M_S

your light seems to be smaller then mine. others lamps seem to fit too. did you perhaps size up the model. also the whole point of this lamp is to not have the black bars on the side that’s why I made it multiple parts, so if you want the more conventional structure as you have said you can print a different lamp as I’m not going for the conventional lamp that every other panel lamp is like.

(Edited)

@Sbreeguz

Replying to @Stuart_M_S :

My lamp fits perfectly into the hole, it's a kit 001, what I meant is that the lamp remains mobile nonetheless, it doesn't rest anywhere, if you apply slight pressure to the embedded lamp, the lamp comes off easily, what I meant is that you could create a base on which to rest/glue the lamp, leaving just a hole for the USB cable to exit, I don't know if you understand

Show original

@PrinterPaul71

Boosted

love it. thanks.

The designer has replied

@Stuart_M_S

no problem glad you like it!

@firstt1mer

Boosted

I love this design! It is very unique and just fun to look at. I printed with White PETG (only white I had) and I must say it came out very nice. 2 x Boosts sent 🔥🔥

The designer has replied

@Stuart_M_S

Thankyou so much!

@user_3928763432

Print Profile

0.2mm layer, 2 walls, 15% infill

Saw a cool lamp and printed it

Show original

@m__Jay

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Super!

@Shalene1992

Print Profile

0.2mm layer, 2 walls, 15% infill

Used transparent red filament…turned out awesomely!🔥😍Thanks for the print!🙏

@king.red

Print Profile

0.2mm layer, 2 walls, 15% infill

the corners of the panels leave a gap that’s bigger than the pictures show.

The designer has replied

@Stuart_M_S

it might be the light making it seem smaller. sorry. I just like the way it looks with nothing going up the corners. and personally I like the little light coming out the corners it defines were one panel ends and another begins. but I do understand the pictures could be a little misleading and for that I am sorry.

@Stuart_M_S

I have just posted a new model that blocks the light in the corners form the inside of the lamp

@user_3532147107

Print Profile

0.2mm layer, 2 walls, 15% infill

The side plates are not connected, leaving a gap that allows light to shine through—especially with the required bright lamp. I'll try gluing them together, but incorporating this into the print design would be preferable.

The designer has replied

Show original

@Stuart_M_S

I have just posted a new model that blocks the light in the corners form the inside of the lamp.

@danielraedicker

Print Profile

0.2mm layer, 2 walls, 15% infill

Overall, quite good. It would be nice if there were some small angles on the side

The designer has replied

Show original

@Stuart_M_S

Thankyou and do you mean sides of the panels or on the top and bottom? Cause their is a small chamfer on the panels just they are to thin for it to help and allow them to stop a little light from coming out of the corner, but I will try to make it better on future panels.

@Stuart_M_S

I have just posted a new model that blocks the light in the corners form the inside of the lamp.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Flame Lion Lithophane

Braui93

Tealight Flame

HpInvent

245

287

Dumpster Fire Magnet

unobjb

2 Flaming Souls HueForge

Kitus3D