Connect Four Game - Four in a Row by KS

Toys & Games>Board Games

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 5% infill

13.9 h

3 plates

4.2(9)

0.12mm layer, 2 walls, 15% infill

25 h

1 plate

Open in Bambu Studio

Boost

131

275

301

Released

Description

Experience classic fun with a modern twist! This 3D-printed Connect Four game offers a sleek, durable design perfect for game nights.

Lightweight and portable, it's ideal for family gatherings or travel. Print yours today and connect more than just four!

I made this Connect Four (Vier Gewinnt) game as a learning exercise using Fusion 360.

The model was printed on a Bambu X1 Carbon using 0.2mm layer height and a 0.4 mm nozzle. 21 stones of each color are needed, best printed with a 5mm brim.

The photos show a rendering of the game in Fusion 360 and the final product, including a 2x1 prototype that can be used to optimize print parameters.

I hope you like it. Please print and share!

connect 4

connect 4 - 4 in a row - 4 gewinnt

Comment & Rating (23)

@wreckitretail

Print Profile

0.16mm layer, 2 walls, 5% infill

looks good so far! slight stringing but good!

@user_1815138091

in case the stones don't fall through, pushing one through using a knitting needle generally clears the print

@garshwin

Print Profile

0.16mm layer, 2 walls, 5% infill

A perfect little game for my niece! The pieces fit perfectly! All that’s missing is a small storage pouch sewn by my sweetheart Thank you for sharing

Show original

@user_1815138091

Happy to hear that 😍

@user_3879558571

Boosted

Print Profile

0.16mm layer, 2 walls, 5% infill

great print

@user_1815138091

Nice! Love to see these prints!

@user_1815138091

I made this print in sleek black and white to fit onto the shelves of any designer apartment.

The designer has replied

@user_1815138091

If you want to buy a printed version, someone (not me) is selling it here on Etsy: https://www.etsy.com/uk/listing/1836685117/3d-printed-connect-four-game-fun-and-eco

@Jerem5520

Print Profile

0.16mm layer, 2 walls, 5% infill

It's superb. I printed it using three different greens, and the result is astounding. I highly recommend it.

Show original

@jeje1486

Print Profile

0.16mm layer, 2 walls, 5% infill

Other Issues:The parts don't descend very smoothly

Show original

@user_1815138091

If there is some stringing, a little bit of brushing helps, or pushing the pieces with a knitting needle 2-3 times

@Zabeth

I cannot get the "chips" to print right. I've tried twice now, and gotten messes both times.

The designer has replied

@user_1815138091

I am sorry to hear that. the stones need to be printed upright. Important then is to add a brim (an option in the slicer), make it 5 mm wide. Otherwise the stones may tumble and you get spaghetti.

@user_1815138091

Replying to @user_1815138091 :

I could print them using default settings otherwise on a Bambu X1C and a Prusa XL.

@Zabeth

I ran a calibration on my A1 and started attempt #3. I thiiink the calibration may have fixed it. It's going on clean so far, brims are done and it's starting on the pieces.