Project: WonderWoman.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 158.70x221.30mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3.1mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #15 (1.28mm) swap to Latte Brown
At layer #27 (2.24mm) swap to White for the rest.