Picture Hanger for Brick Walls
Picture Hanger for Brick Walls
Print Profile(1)
Description
Slip these into the openings between the bricks to hang pictures on a brick wall. This only works if there is recessed mortar between the bricks as shown in the pictures. These were printed with PETG because PLA will deform under pressure and would likely fall out in a week or two. Slide the picture hangers in from left to right and make sure it is a snug fit. I am only hanging very light weight photographs. Use at your own risk. I have no idea what the weight limit is. The print profile is printing at 0.20mm Strength.
Plate 1 contains 10 picture hangers that are 12mm tall. Plate 2 contains 8 picture hangers ranging in size from 10mm to 13.5mm. If you need a different size these can be scaled in the slicer.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)