Giant Blastoise 40cm - multi-part Remixed by Ethanprint3D

Remixed by

Ethanprint3D

Toys & Games>Characters

IP Report

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 10% infill

Designer

168.3 h

16 plates

4.9(31)

0.16mm layer, 3 walls, 5% infill Fits on A1 Mini

108.7 h

26 plates

4.8(9)

65% Scaled, 0.08mm layer, 2 walls, 10% infill

70.4 h

16 plates

4.8(4)

Open in Bambu Studio

Boost

341

658

119

967

237

Released

Description

Content has been automatically translated.

Show original

A remix of the Blastoise model in a giant size, approximately 40cm tall (will not fit on an A1 mini).

I oriented all the shell pieces upright to avoid visible nozzle marks.

The shell section is barely within the build plate limits of an A1.

Pay close attention to your support settings to ensure easy removal; use only standard supports.

For the eyes, I used Bambu Studio's colorization feature, printing the rear shell brown.

Printed at 0.16 with 10% gyroid infill.

All PLA filament:

- Esun light blue

- Jayo matte black

- Jayo matte white

- Polyterra earth brown for the rear shell and eyes

- Elegoo wood for the front shell

- Jayo grey for the cannons

Happy printing!

pokemon

tortank

blastoise

Comment & Rating (95)

@Bermudez01

Boosted

I am having issues with plate 2 (pictured), it keeps detaching from the print bed and making a mess around 5 layers in. I am thinking it may be support issues, has anyone run into this? Every other plate has printed fine. My bed is clean.

@crystalmed

To my knowledge, it shouldn't be positioned like that, but on a different surface. Please review my print profile. None of the parts actually require supports

(Edited)

Show original

@CropTop_Choppa

Replying to @crystalmed :

I just loaded up the head on a plate and without changing anything it has supports for the ears and inside mouth...is that supposed to be there?

(Edited)

@crystalmed

Replying to @CropTop_Choppa :

Oh yes, my apologies, the head has supports for the eyes. However, they will be invisible in the final result

(Edited)

Show original

@Schiessboerger

Boosted

My first somewhat larger print and I am utterly satisfied A fantastic model 💪🏼

The designer has replied

Show original

@Ethanprint3D

thank you

Show original

@user_3261730051

Boosted

Print Profile

0.16mm layer, 2 walls, 10% infill

@Ethanprint3D

Top bravo

@Schiessboerger

Boosted

which blue filament did you use? Looks awesome!

@user_3261730051

Boosted

Replying to @Schiessboerger :

I use tau blue is a version of the Argentines company Printalot

@Noco

Boosted

Print Profile

0.16mm layer, 2 walls, 10% infill

One or two parts had slight issues initially, but this is not visible in the assembled state It looks fantastic

Show original

@mattyd

what colour did you use for the chest shell?

@Noco

Boosted

Replying to @mattyd :

I used Bambu's matte desert brown for the chest

Show original

@Ericpome93

what plate is the middle of the shell at feel like I’m missing something

The designer has replied

@Ethanprint3D

Hello on plate number 8

Show original

@Ethanprint3D

@chris3D.Druck

Boosted

Print Profile

0.16mm layer, 2 walls, 10% infill

Great, everything worked out well, although the filament wasn't ideal, hot glue and super glue made it work quite well in the end 👍🏻

Show original

@Ethanprint3D

Thank you, beautiful print 👌

Show original

@user_2197179675

any idea why I'm getting this issue when starting on the black pieces, 3rd time it's happened now

@crystalmed

I only encountered this issue with the 02mm nozzle The black parts are not very visible perhaps divide the part into two pieces and print the area where the problem begins separately

Show original