This is a beautiful modern ribbed nightstand lamp for you ambient! I am very exited about all these ribbed lamps you can buy nowadays. So I decided to design my own printable one.

It's clou is that you can take a boring lamp holder and convert it to this stylish lamp. The outer diameter of the lamp holder is 37 mm. You can clamp it to the base with its own bolt (see the pictures).

Base and shade have both three magnets embedded which hold the shade in place. They are designed to be inserted within the printing process.

You can print the shade in normal mode with different wall thicknesses. On the shade use support just on the outsight where the rips hang over the ring.But you can also print it in vase mode. In this case choose the shade file "....withoutRing" and the seperate file for the adapter ring.

For all variants use support blockers for the magnet holes in the ring and the base.

Details:

Overall height: 220 mm

Shade height: 200 mm

Shade diameter: 124 mm

Pause shade at layer: 20

Pause base at layer: 71

(when using a standard layer height of 0.2 mm)