This is a 6-color print

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 174.4x220.12mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2.5mm and the Actual Depth is 2.6mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 7
This print uses 7 unique filaments

Swap Instructions:
Start with Black

At layer #17 (1.44mm) swap to Jade White
At layer #18 (1.52mm) swap to Gray
At layer #19 (1.6mm) swap to Blue Gray
At layer #25 (2.08mm) swap to Red
At layer #30 (2.48mm) swap to Orange for the rest.