Hi!

PRINTING INSTRUCTIONS

ONLY THE BASE PIGGY BANK AND THE PLUG ARE IN A PRINT PROFILE, YOU NEED TO ADD YOUR HUEFORGE ART SEPARATELY. INSTRUCTIONS ON HOW TO DO SO ARE BELOW.

The only supports to remove are around the lip where the screw plug goes in.

This model uses negatives to cut away pieces of your Hueforge art that you make or that you download from another creator.

If you choose to make your own, ensure that it is at least 200mm wide and 100mm tall. I have had luck scaling Hueforge art so long as I keep the Z height the same as the original.

STEP 1 OF 5

Preparing your HueForge Art.

Bring your Hueforge art into Bambu Studio

Then right-click your Hueforge art, add negative part.

YOU WILL NEED TO DOWNLOAD THE FILES SEPARATELY ALSO, AS THE PRINT PROFILE CAN NOT DO THIS AS A NEGATIVE.

STEP 2 OF 5

Choose the “Bank Negative” file out of the downloaded files.

STEP 3 OF 5

Now, line up the negative using the move tool to make the window section the portion you want to be on your piggy bank.

YOU HAVE TO MOVE IT INTO THE BUILD PLATE USING THE BLUE “Z” HANDLE SO THAT THE NEGATIVE IS PART OF THE MODEL FOR THE NEXT STEP.

STEP 4 OF 5

Now is the time to boolean the two meshes.

on the left panel under the “objects” tab right click your Hueforge art, and select “mesh boolean” Expect this step to take a minute or two after you click a button.

IF NOTHING CHANGES, UNDO. THEN MAKE SURE YOU HAVE THE NEGATIVE MESH MOVED DOWN THOUGH THE ART AND BED.

STEP 5 OF 5

Now you'll slice your Hueforge art like normal, once finished then glue into the piggy bank.

I hope you enjoy! if you like it please leave a rating and a photo I would love to see what you talented people come up with!

Thank you for stopping in.

If you would like to support me it would mean the world to me.

https://buymeacoffee.com/layeredvisions

patreon.com/LayeredVisions

Or leave me a boost.