Fire Sword QuestKeeper-TTRPG Loot Bookmark
Fire Sword QuestKeeper-TTRPG Loot Bookmark
Print Profile(1)
Description
This is a Hueforge!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 62.64x200mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Kingroon Red Transmission Distance: 4.2
PLA PolyLite Pro Orange Transmission Distance: 7.5
PLA elegoo Yellow Transmission Distance: 5.9
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #13 (1.12mm) swap to Orange
At layer #18 (1.52mm) swap to Yellow for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)