Knife block by kilinccagatay

kilinccagatay

Tools>Organizers

GIF

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

29.6 h

5 plates

5.0(3)

Open in Bambu Studio

Boost

130

303

144

Released

Description

Boost Me (for free)

1- No matter what The Top cover and Base need to be printed with 0.2mm layer height and 0.4 line width. It is designed to be printed with this configuration. Other configurations might end up with stuck strings.

The print for the base and top will take around 16 hours Profile showing estimation for optional parts as well.

. .

2- The TPU gasket is optional, but I strongly recommend printing it if you have a slippery surface. Since your knives will rest on the block, the gasket provides an additional layer of safety and grip.

3- The drip tray and base with holes are also optional. If you want a drying feature for your knives, this version will suit your needs.

Disclaimer and License:

This model is intended for personal use only. Redistribution or commercial use, including selling the 3D model or any printed version of it, is strictly prohibited.
I am not responsible for any injuries, damages, or mishaps resulting from the use of this model. As it is designed to hold knives, proper caution should always be exercised. Use at your own risk.

Comment & Rating (9)

@Elebeyt

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

I had to slice out a portion of the bottom layer for 2 reasons, 1 is so that I will have a better drainage for water droplets, 2nd is so that it can fit to my A1 mini. other than that it is perfect and aesthetically pleasing.

The designer has replied

@kilinccagatay

I wish I get the 5 stars but thank you for the boost 😅🙏🏻 Did you used the version with holes? Because there is a version for specially for wet usage.

@Elebeyt

Boosted

Replying to @kilinccagatay :

there is a version with holes but there are areas where the waters cannot reach the hole and get trapped so I had to remove the bottom entirely. also removing it helped to fit it into my mini😅. let me edit the rate since I love this knife block.

@kilinccagatay

Replying to @Elebeyt :

I will reconsider what you just said 👍🏻 Maybe I will come-up with version 2 of it and thank you for the 5 stars also 😆

@user_1353841507

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Great design and printed perfectly.

The designer has replied

@kilinccagatay

I am glad you liked it 🙏🏻 Thanks for your good comment as well 👍🏻

@FreeWorldGreg

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Fantastic I was able to print it on an A1 mini with a little cutting and gluing It works perfectly Thank you for this model

The designer has replied

Show original

@kilinccagatay

Thank you for printing and the boost. I hope it will serve you well =)

@kilinccagatay

By the way I would like to see a photo of your print if you don't mind 😅

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Simple Knife Block

user_1215413210

Kitchen Knife Block Holder Organizer

foxedrod

682

765

Kitchen Knife Block Stand for Gridfinity

foxedrod

Knife sharpener

user_1336402005