Tin Tin Rocket by printchallenge

printchallenge

Props & Cosplays>Other Props & Cosplays

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

5.2 h

1 plate

4.9(148)

0.2mm layer, 2 walls, 15% infill

Designer

1.7 h

1 plate

4.9(100)

0.2mm layer, 2 walls, 15% infill - A1 Mini verson

4.7 h

3 plates

4.7(38)

100% - 70cm 0.2mm layer, 2 walls, 8% infill

11.9 h

4 plates

4.8(16)

Click to see more

Open in Bambu Studio

Boost

401

705

371

273

1.8 k

1.6 k

Released

Description

update 14/07/2024: alignment pin added to rocket body print profile

I think this one is pretty easy to print…

just load the stl files and everything is correctly oriented. I printed in PLA with standard settings, no supports needed.

I started counting the rings from the bottom, so the second row is the second from the bottom and so on… The bottom white disks are in the bottom left corner on the build plate. The top white disks are in the top right corner:

grtz

Comment & Rating (371)

@tiger.49

Boosted

Very cool model, thx a lot, always loved this particular rocket... created a cylinder to emulate flames, added one ws2812 LED to it, controlled by a ESP8266 with WLED, test print was in Bambu Lab PLA white, final print is in Extrudr PETG transparent yellow, all printed on my A1 Mini....Final place is on a tiny Ikea Lack shelf...

GIF

@user_4178875328

hi what colour pla did you use for the rocket?

@tiger.49

Boosted

Replying to @user_4178875328 :

The Rocket was printed in Bambu Lab PLA basic white and 3DJake ecoPLA red, the "flames" in Extrudr PETG transparent yellow

@user_3796553170

Print Profile

100% - 70cm 0.2mm layer, 2 walls, 8% infill

very good print. unfortunately some of the white pieces failed during print. And it was hard to identify and print just those failed pieces

@lionel.sabbah1

Boosted

is yours 70cm tall? I printed mine on the P1S and it came to 57cm. not sure why. i printed the profile with no modifications…

@user_568733308

Replying to @lionel.sabbah1 :

Precisamente tengo la misma pregunta...

@user_2758963305

just the same with the A1 57cm

@TOSHIRTCOM

le résultat

The designer has replied

@printchallenge

Looks great!

@user_870772350

Top, fit perfectly, just missing the connexion cube. I Ve done a 14.6mm by 20mm and fit nicely .

@steffen.scheit

That's probably not how it is supposed to be, right? Where did I get it wrong?

The designer has replied

@printchallenge

Hmm I updated the white parts and probably made a mistake… I scaled if by 90% but I forgot to reset it… so please print the white parts again but scale them up by 100/90=111% Or wait until I fix it, I will try to do it later tonight

@printchallenge

ok should be fixed now!

@Yvan12232

A very beautiful piece. With one small detail (nothing serious). With an A1 mini the connecting cube is too large. It needs to be reduced to 67% of its size to fit perfectly. Thank you for this beautiful creation!

Show original

@AF360

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

After I had glued it together I noticed that I did not align the little bulges to the three wings/feet of the rocket, my bad. Now the bulges are 90° off. (Maybe you could add some hint in the description or make a connector which does only allow connection in one of the correct rotations?) Anyway it's a great model. I adjusted the print profiles to use variable layer height and especially for the round feed and the top of the rocket I used 0.08 with a very smooth result!

(Edited)

@krappe

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

My daughter adores them

Show original

@krappe

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Sehr schön geworden.

@Sandki68

Print Profile

0.2mm layer, 2 walls, 15% infill - A1 Mini verson

Superb file, thank you, printing on A1 mini

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.