Grinder V2 remix Remixed by Anzalone

Remixed by

Anzalone

Hobby & DIY>Other Hobby & DIY

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

2.1 h

1 plate

4.8(27)

Open in Bambu Studio

Boost

168

374

272

Released

Description

The original model calls for magnets. I've remixed to remove the magnet insert(s) and allow cleaner use of it (otherwise, herb will collect in these spots and its hard to clean)

one of the best grinders I've used… printed or not.

you may need to superglue the insert into the bottom of the grinder if the tolorances aren't tight enough

if you like it - boost it to increase visibility to others

Boost Me (for free)

inspire me

Comment & Rating (32)

@Kangaroo

Print Profile

0.2mm layer, 2 walls, 15% infill

Grinder works great!

@user_1474230967

Boosted

Does the top sieve need to be glued in? Otherwise it rotates with

The designer has replied

Show original

@Anzalone

sorry! I forgot to state that in the details. yes, superglue needed on the insert.

@user_1474230967

Boosted

Okay, then I guessed correctly. Thank you

Show original

@user_1561880326

Print Profile

0.2mm layer, 2 walls, 15% infill

I wish there was room for a magnet

The designer has replied

@Anzalone

this is the magnet delete remix. the original has a magnet (and the original maker refuses to post it on makerworld/will flag for takedown if it’s put up without modification). follow the link to printables and slice yourself for a magnet version. I used loosely fit.

@STLREALM

Print Profile

0.2mm layer, 2 walls, 15% infill

Prints exactly as it should. Does Not grind well at all. This design is great, BUT the actual grinding knubs should be more like spikes. I have printed many grinders, and this one grinds herb the worst. even the driest stuff it just moves it around.

@user_1087497594

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Very cool Design!

@user_2943259633

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Works perfectly

Show original

@user_3754675368

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

does not grind well unless you tear stuff up into little pieces for it. I think the bottom piece of the grinder portion needs to be glued in so it doesn't slip when you try to grind. Also the teeth should be closer together I think to work better.