Mini Cable Management Box by Mike.Fr

Mike.Fr

Tools>Organizers

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

4.6 h

3 plates

5.0(4)

smaller A1 mini Version

Designer

7.4 h

4 plates

4.7(3)

Open in Bambu Studio

Boost

124

Released

Description

The cable box has the dimensions 200mm x 106mm x 80mm (without lid). The lid with the indentation may require support. The lid is simply placed on top and has no other attachment.

I've added a small test version.

If there are any desired changes, please let me know. :-)

cablemanagement

cableorganizer

cablebox

Comment & Rating (24)

@user_1334651530

Why is the lid a bit longer than the box itself... Just downloaded the file today. Didn't realise until I already printed it out. I double checked I didn't scale the models.

The designer has replied

@Mike.Fr

Did you perhaps mix the models for the A1 mini and the regular Bambu? The A1 mini model is slightly smaller

Show original

@user_1334651530

i simply clicked the download and open, let me try again, thanks for responding so quickly.

@Mike.Fr

Replying to @user_1334651530 :

I have checked and the error was on my side. I am truly very sorry. My profile showed the A1 mini version. I have corrected it.

Show original

@Marfoxnk

Print Profile

0.2mm layer, 2 walls, 15% infill

The lid turned out well, the supports are easy to remove

Show original

@Mike.Fr

That's great to hear Thank you for the photo It looks great 👍

Show original

@Chalski

I really dig it

The designer has replied

@Mike.Fr

Thanks! looks great

@dodowei

Boosted

I discovered it lacked a lid after printing Could you add one

The designer has replied

Show original

@Mike.Fr

I have update the print profile. You can still download the lid as stl.

@dodowei

Boosted

Replying to @Mike.Fr :

So much appreciate it, i really like this design

@Mike.Fr

Replying to @dodowei :

Thank you 🙂

@user_3851880503

Boosted

Excellent ! Many thanks

@user_2585637414

Print Profile

smaller A1 mini Version

The tolerances vary greatly upwards, which is why I would not print the model again. It would be better if the opening at the top was closed to achieve a better fit. Great project.

Show original

@Mike.Fr

Hi! Thank you for your feedback! I'm not familiar with this problem. What do you mean by "the opening at the top would be closed"? Should I create a model that has the lid fixed on top? Then you would have a lot of support structure. If you like, I can create this for you.

Show original