Note 1/2/25: Did some cleaning of Nezuko prints. Did not know how to photo edit then, so came back to see what can be improved. Got rid of the shadow in the forehead, lessen one layer of  red since the Bambu Lab maroon red is slightly darker than the Esun I used before, and cut the print to 9x16 ration. Also, added another pleasing portrait of Nezuko and fulfill the promise of uploading a better one of Tanjiro to accompany her.

Back Story

Learning to do pinks. Currently watching Demon Slayer. Perfect subject. Wanted to accentuate the Eyes, so added the Magenta layers to pop a little more. This print has been done - this is my Pink take on it.

Demon Slayer - Nezuko 
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 112.54x200mm. Can be resized by changing the X and Y axis the same percentage, but leave the X axis at 100%.
 

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.4
    PLA BambuLab Basic Maroon Red Transmission Distance: 4
    PLA BambuLab Basic Hot Pink Transmission Distance: 7.6
    PLA BambuLab Basic Magenta Transmission Distance: 6
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Maroon Red
    At layer #13 (1.12mm) swap to Hot Pink
    At layer #17 (1.44mm) swap to Magenta
    At layer #19 (1.6mm) swap to Jade White for the rest.
 

This is a five color HueForge. Use this tutorial by Cloudy Nostalgia to print more than 4 colors on 1 AMS.

To become an Authorized Seller of any of my works, please visit my Patreon page to sign up and become an Authorized Merchant. In addition, you will have access to exclusive membership designs. https://www.patreon.com/3djdprints

To help fund my work, consider making a small donation on Patreon.