Project: Barman ostia Robin.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x149.67mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.9mm and the Actual Depth is 1.9mm

Filaments Used:
PLA Smart Recycled Black Transmission Distance: 0.5
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA Paramount 3D Terra Cotta Transmission Distance: 4
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6

This print uses 7 unique filaments

Swap Instructions:
Start with Black
At layer #2 (0.24mm) swap to Red
At layer #6 (0.56mm) swap to Black
At layer #9 (0.8mm) swap to Blue
At layer #11 (0.96mm) swap to Jade White
At layer #15 (1.28mm) swap to Terra Cotta
At layer #16 (1.36mm) swap to BambuLab Green
At layer #18 (1.52mm) swap to Yellow for the rest.