Makes a great gift!

For a 5 color change, read below for changing to 5th color!

AMS Ready - Color changes can be manually swapped.

Scale up or down on X/Y axis only. DO NOT adjust Z height!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Orange Transmission Distance: 7
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #13 (1.12mm) swap to Orange
At layer #15 (1.28mm) swap to Yellow
At layer #20 (1.68mm) swap to Jade White for the rest.

To change to 5th color, simply add a pause by right clicking mouse after slicing. See below. A pause has been implemented at layer 19 for ease. If you do not want the pause, just delete the pause after slicing and re-slice!

Step 2. Pick the 5th color (White) and choose the AMS slot for black. During the pause, or when black is done, simply swap that out for white, and TADA! Easy as pie!

Please leave a review! Thanks!