Phone Camera Mount for A1/A1 Mini by David

David

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

0.2mm layer, 2 walls, 15% infill

Designer

2.5 h

1 plate

4.8(13)

Open in Bambu Studio

Boost

167

128

Released

Description

Phone camera mount for the A1 Mini, to be used with “IP Webcam” app. Designed originally to fit Samsung A40, but should also fit other phones (Samsung S10, Samsung A3, iPhone 16 Pro Max tested as well).

Allows the phone to be clamped, and allows for angle adjustment in both axises.

Requires 5 M4 screws/nuts.

A1 A1 Mini

mount

camera adapter

Comment & Rating (26)

@nologin666

Print Profile

0.2mm layer, 2 walls, 15% infill

Nice, just what I needed.

@socram

Thanks for sharing! Good to see it works on the A1 as well :)

@LMA_SC

Will this fit the A1 or can it be modified? I have an old iPod this would work great in

The designer has replied

@KingDavy

Im wondering the same thing lol

@socram

I'm not sure if the mount in the motor block is the same size on the A1. If it is, it will work. There is models that look made for both the A1 and the mini (like this https://makerworld.com/en/models/835483?from=search#profileId-780641), so it may work

@nologin666

Replying to @socram :

I've tested it with Samsung Galaxy S7 - it is fine, just the printer screen must be rotated.

@Trong88

thank you so much. i was planning to buy a camera to shoot this angle. now seeing your design it has saved me a significant amount of money.

The designer has replied

@socram

It's great to hear that! Thanks for the nice comment!

@Myszorek

Boosted

Nice

The designer has replied

@socram

Thanks for the boost!

@orrudesigns

Print Profile

0.2mm layer, 2 walls, 15% infill

printed prefect, holds my samsung note without issues.

@user_3697187356

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

ottimi

@user_1501824196

Print Profile

0.2mm layer, 2 walls, 15% infill

printed great but not what I was needing.

@AJay88

Print Profile

0.2mm layer, 2 walls, 15% infill

great design

@dom85

Exercise caution due to the axis's fragility It is advisable to print it flat It is very fragile between the head and the tube And instead of spokes to hold the phone, slopes would be preferable This would allow for more phones, as the older, thicker ones do not fit

Show original