Desk clock for Clock Components Kit 011
https://us.store.bambulab.com/products/clock-components-kit-011
 

Small clock is 9cm in diameter. Large clock is 11.5cm.
Super easy print without any supports and easy press-fit assembly.
Just push the plate into the housing from the back and assemble the clock.

Shown model is printed in Bambu Lab Basic PLA Purple, Blue Grey and White.

Click here to see my other models.

General 3d Printing Tips

• Make sure your printing plate is clean! Oils from your skin will cause adhesion issues for your prints. Regularly wash your print plate with a detergent like Dawn and avoid touching the surface when removing prints from the bed.
• If it's an option on your printer, always opt to level the bed before each print. If you have to perform this manually, make sure you do this after every few prints. It takes a bit of time and patience, but it's a fair trade for reliable prints.
• Ensure bed and nozzle temperatures are within the expected range for the material you are printing. Temperatures that are too high or too low will affect the print negatively by causing warping, malformed layers or adhesion issues.
• Reduce your printing speed. Slower print speed is especially important for overhangs because it gives the material more time to cool as it's deposited.
•