IKEA Skadis Tilt Drawer by eethansshen

eethansshen

Tools>Organizers

GIF

Print Profile(9)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

2.7 h

1 plate

4.7(252)

Larger Version (90×50×77mm)

Designer

3.4 h

2 plates

4.5(6)

with a handle part for easy opening 0.28mm layer, 2 walls

1.6 h

1 plate

4.7(58)

Change Printing setting / Handle / Fine-tune appearance

2.4 h

1 plate

4.7(23)

Click to see more

Open in Bambu Studio

Boost

2881

6942

430

343

4.9 k

2.8 k

Released

Description

Tilt Drawer for IKEA SKÅDIS

I designed this tilt drawer for IKEA Skadis. This tilt drawer allows for easy opening with a simple upward lift. It’s perfect for storing small items, while its design prevents dust accumulation. Combining a sleek appearance with functional and creative design, this is a must-have accessory for your SKÅDIS setup.

-----------------------------------------------------

**2025.1.3 Update**

Uploaded a larger version with internal dimensions of 90×50×77mm (original version: 70×45×56mm).

-----------------------------------------------------

Important Notes:

1. Circular Clips: After removing the supports, ensure the bottom of the two circular clips is smooth. If the drawer doesn't open smoothly, use sandpaper to lightly sand it for the smoothest result.

2. Securing the Hook: If the hook feels loose, you can insert a fastener from the back of the SKÅDIS board to stabilize the base and prevent wobbling.

This tilted drawer is the perfect blend of practicality and style, making it an essential addition to your SKÅDIS collection!

---------------------------------------------------------------------------------------------------------
If you enjoy my work and would like to support me, or if you're interested in selling physical products of my designs, please check out my Patreon

---------------------------------------------------------------------------------------------------------

Comment & Rating (430)

@EL_2343450399

Boosted

Good design! I changed the printing angle that let the hooks facing down and then only make support for bottom side. This way don't need any support for the track. I think it may make the tracks more smooth.

(Edited)

The designer has replied

@Martol

I guess this is way superior to the original - in the end you don't see the side facing the peg-board! would it be possible for you to post your print profile for others to use?

@eethansshen

@EL_2343450399 Great idea, you could upload your print settings if you're willing to share.

(Edited)

@user_1139378801

I like this idea. Maybe publish a new profile when you have the time please.

@Roiku3D

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Really good stuff! But I wonder what the smallest part is for???

The designer has replied

@eethansshen

@Roiku3D Thanks for the photo. It is used to secure from the back to prevent the base from moving when upward force is applied to the box. Is there any issue with the printing process?

(Edited)

@Roiku3D

Boosted

Replying to @eethansshen :

OK, I see, I change my rate then ! Thanks for the reply.

@user_3984029696

Boosted

Replying to @eethansshen :

Thank you for the info. Do you glue that smaller part on?

@MagnetDanny

Boosted

great design, boosted, many thanks for sharing, the only thing I needed is a handle for easy opening, so I added a profile with it if anyone else need

@user_795556884

your profile still doesn't have the handle

@MagnetDanny

Boosted

Replying to @user_795556884 :

I'm sorry about that, I guess you meant that the "back handle" was missing, not the handle I made, so I added it

@matticreative

Print Profile

0.2mm layer, 2 walls, 15% infill

Prints very nicely! However the supports for the curved gap seem a little excessive and really add to the print time. Apart from that an awesome design!

@Greg_Ramotny

what alternative do You suggest?

@matticreative

Replying to @Greg_Ramotny :

I would suggest a small in-part support. Basically just filling the curved opening unitl the overhang is managable. That way you wouldn't need the two big tree supports from 4 sides. I just think tree support isn't the most efficient here...

@Invader_Akira

Print Profile

0.2mm layer, 2 walls, 15% infill

I modded it to fit a Multiboard and I will probably be printing more of these as I go.

GIF

@user_2998113434

Do you have files for this version this looks like a great addition to my wall

@Midpoint

Replying to @user_2998113434 :

I have added a MultiBoard/Multiconnect Print Profile

@Invader_Akira

Replying to @user_2998113434 :

Hopefully it should be approved soon as I have uploaded it.

@LeafStranger

Print Profile

0.2mm layer, 2 walls, 15% infill

overall very nice print. I did need to sand/rasp out some of the rougher bits in the groove, which was fine.

@user_138409275

Boosted

Can you upload a version from this image? With the hooks higher.

The designer has replied

@eethansshen

@user_138409275 No problem, I have uploaded it to the model’s STL file.

(Edited)

@user_138409275

Boosted

Replying to @eethansshen :

Thank you very much(: Great project!

@Hankdatank

Print Profile

0.2mm layer, 2 walls, 15% infill

love this design, had some post processing but that’s due to the old filament and not the model design itself. Awesome!

@okphotography

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

nice print

@Ceppeto

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

siple and great storage for tiny parts

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(9)

Description

Comment & Rating (430)

License

Related Models

Ikea Skadis Tilt Drawer

Drawer pulls for SKADIS GRID DRAWER

skadis ikea panel light version 225x225mm 5t

Angled Quad Organizer for Skadis