12th Scale Upper Cabinet with flat side by RaccoonCrafts

RaccoonCrafts

Miniatures>Other Miniatures

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

5.0(3)

Open in Bambu Studio

Boost

112

Released

Description

The molding does not go around on 3 sides. The left side is left flat to allow room for a cabinet to be next to it.

1/12th Scale Upper Kitchen Cabinet. Used 2 small pieces per door of 1/16 in. wire to connect to cabinet. Do not use a piece the full length of the door, or it can break, must use two smaller ones.

Other models in photos also available.

dollhouse kitchen

12th scale kitchen

12th scale cabinet

Comment & Rating (8)

@meatyjokester

Wonderful files! Scaled up to 138% the regular size for a perfect fit for Miniverse!

@Moffymaker3D

hi, i see your note about using wire for the doors. how do you put the two smaller ones in? do you glue them in?

The designer has replied

@RaccoonCrafts

Sorry, I am not sure what you mean, could you please elaborate? The handles are glued on. On, the two doors, one at a time, hold the door in place. I put a piece of wire (around 1/8th of an inch if I am remembering correctly) through the top and bottom holes of the cabinet. Then slide them down through the doors. I pushed the top/bottom gently against my table to insure the wire was flush. Fell free to message me and I can see if I can send a video if this does not make sense!

@RaccoonCrafts

Replying to @RaccoonCrafts :

(1/8th is the approximate diameter! Length around 1/3rd I’d say).

@masterofall6

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

These are great!!! Can't wait to see what's next!

@masterofall6

Boosted

Perfect for our dollhouse!!! Thanks for sharing!

@user_2294161420

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_2883659793

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Threaded Seamless Dragon Scale Egg Container

NUKDDD

654

1.3 k

Dragon Scale Soprano Recorder

NUKDDD

302

382

Cabinet hinge repair plate

Jakluk

580

258

Roll-Out Pallet — 1:10 Scale

JustCallMeDaddy