Go check out some of my other video game themed creations!

This took more time that I'd like to admit preparing. Hueforge v0.8.0 is a powerful tool – but you still have to finagle with it for a few hours if you want it to come out exactly right.

I'm REALLY happy with how this one turned out. :)

Should go nicely with your Link one:

--------------

This print uses 6 colors. It does NOT require an AMS, but an AMS does make it so you don't have to half-babysit for 5 hours. There are only 9 color changes so you can definitely do it without automation.

Best of all, this fits naturally (albeit barely) on the A1 Mini's print bed. I've also strategically placed the prime tower so as to ensure it still fits despite it requiring a prime tower. (Tower… its like 2mm tall. haha)

---------------

Project: ZeldaChristmasHueForge.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 174.41x179mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 3mm and the Actual Depth is 2.3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 7
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Green Transmission Distance: 2
This print uses 6 unique filaments

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Blue
At layer #8 (0.72mm) swap to Orange
At layer #9 (0.8mm) swap to Black
At layer #11 (0.96mm) swap to Red
At layer #14 (1.2mm) swap to Jade White
At layer #17 (1.44mm) swap to Black
At layer #18 (1.52mm) swap to BambuLab Green
At layer #20 (1.68mm) swap to Orange
At layer #24 (2mm) swap to Jade White for the rest.