Mōcintosh Secondary Screen for 🐟 Lazing

• This secondary screen uses a screen driver board kit purchased from Taobao|88CNY

  Friends from the global platform may find it difficult to purchase, sorry... (*mō yú: derived from the Chinese idiom "浑水摸鱼", which can be understood as taking a break from work, slacking off while working)

  Screen Specifications: IPS Panel|2.8 inch|640x480|Mini-HDMI Interface|TYPE-C Power Supply

  Purchase Link: https://item.taobao.com/item.htm?spm=a1z09.2.0.0.7ed52e8d6G3t55&id=752384805450&_u=i237vmuc1e4

  Other Accessories: M2x12 Hex Socket Machine Screws x4 (Maker's Supply AA024), M2 Hex Nuts x4 (Maker's Supply AB003)

• Miniature secondary screen, perfect for daily lazing! It can also be combined with various dynamic wallpaper software to create a beautiful desktop setup.

• After weighing resolution and price, I chose this screen. It can barely fit a WeChat window, and the 4:3 screen ratio is suitable for playing old animations.

  (I considered a 3:2 screen for pixel-by-pixel GBA game display, but unfortunately, I couldn't find a suitable one QAQ)

• A small drawer is set up at the back, which can be used to store data cables or USB drives.
• A1 mini single plate can be printed, supports are minimal and easy to remove.
• Recommended filament color from Bambu: Ivory White or Desert Yellow (simulating the effect of plastic aging and yellowing)
• Assembly instructions are shown in the following images:

1. Secure the driver board inside the driver board box, using screws and nuts. (If not available, you can choose not to install screws, but it may be slightly loose)
2. Insert the driver board box and drawer into the back cover of the screen.
3. Insert the screen into the front panel. (After multiple tests, using Bambu Matte filament can make the screen fit the front panel more snugly, it is recommended to pre-dry the filament)
4. Clip the top snap of the screen and front panel into the groove, arrange the cable direction, and then push the bottom in to secure it.