Boxes for Milwaukee 18G Brad Nails, fit M18 FN18GS by lars.sichlau.nielsen

lars.sichlau.nielsen

Tools>Organizers

IP Report

Print Profile(0)

Add the first print profile to earn points

Boost

Released

Description

Boxes for Milwaukee 18G Brad Nails II, fit M18 FN18GS

Problem: Cardboard box with 5.000 nails

Solution: Storage boxes for 18G Brad Nails II.

Available Boxes for Nail size:

16mm
19mm
25mm
30mm
32mm
40mm
45mm
50mm

Note for box sizes, all boxes have a nail+2mm internal height.

Example for 25mm nail box: 25mm nail + 2mm = 27mm internal height.

Comment & Rating (5)

@user_604025471

I'm having issues with your model. Can you please help? The blank lid is designed so that the top surface is face down on the print bed, while printing. That means when I add texts to that surface , the texts is on the inside of the lid, when the lid is on. To correct for the text location , I flipped the lid over, so I could have the text on the correct surface , and the lip would close properly. This created a new problem. when I print the lid in this configuration I get serious warping, because of adhesion issues. I've tried everything I can to correct this, without positive results. My question is can you correct this issue in your design, by having the text print on the first layer, while the outside surface is facing down against the print bed surface. Also, I'd like to know if you can create boxes for 23 gauge pin nails?

The designer has replied

@lars.sichlau.ni

Option 1: Just download the .3mf file with pre applied text or edit the pre applied text. - File mark in screenshot of download box. Option 2: - See description on screenshot of slicer.

@lars.sichlau.ni

No, I do not have the measurements for the 23 gauge nails.

@user_604025471

Replying to @lars.sichlau.ni :

Thank you very much. I'm new at this and didn't know I could edit the text. learned a new function. If I give you the dimentions could you do a design for the pin nails?