The Ultimate 3D printer test by x4FIR_1

x4FIR_1

3D Printer>Test Models

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 10% infill No supports!

Designer

1.2 h

1 plate

4.5(10)

0.2mm layer, 2 walls, 10% infill

Designer

58 min

1 plate

5.0(2)

Open in Bambu Studio

Boost

118

167

Released

Description

This is my Ultimate all in one test print. this model covers tolerances from .6-.1, a gradual slope from 0 to 90 degrees, small overhangs, Chamfers and Fillets right off the bed and what will hopefully be much more! I will update this model with any problems I or you guys find and will add things as requested. If you are to print one thing besides a benchy why not have all tests in one print?

If possible use my provided print profile.

Comment & Rating (17)

@user_728426491

Print Profile

0.2mm layer, 2 walls, 10% infill No supports!

Other Issues:When the printer is creating bridge layers, it lifts, causing the nozzle to strike and detach the part from the bed or break it, and if it doesn't break or detach, the bridges become misaligned

The designer has replied

Show original

@x4FIR_1

The model is made to test your printer. although it sucks your printer can't do 90 degree over hangs that isn't an issue with my model.

@Youngbru

Boosted

Printed well but I am not sure how to interpret everything. Could you provide more text in your description describing what to look for in the various tests? It looks like it printed on a raft, which is difficult to remove. Is this a part of the test?

The designer has replied

@x4FIR_1

Hello, The raft is not supposed to be part of the model and I will update the profile to remove it. As for what the model is meant to achieve, I felt it was self explanatory but I guess I am the designer. Thank you for the feedback and I will update this stuff