Cute Mini Christmas Tree

Copyright Claim

Cute Mini Christmas Tree

Boost
821
1984
140

Print Profile(7)

All
A1
P1S
P1P
X1 Carbon
X1E
X1
A1 mini

Mix of sizes | NO AMS | 0.08mm layer, 2 walls, 15% infill
Mix of sizes | NO AMS | 0.08mm layer, 2 walls, 15% infill
Designer
1.8 h
1 plate
4.8(64)

Six Trees (S) | AMS | 0.08mm layer, 2 walls, 15% infill
Six Trees (S) | AMS | 0.08mm layer, 2 walls, 15% infill
Designer
1.8 h
1 plate
4.9(21)

Four trees (L) | AMS | 0.08mm layer, 2 walls, 15% infill
Four trees (L) | AMS | 0.08mm layer, 2 walls, 15% infill
Designer
2.6 h
1 plate
4.9(28)

[Extra Fine Profile] 0.08mm layer, 2 walls, 10% infill
[Extra Fine Profile] 0.08mm layer, 2 walls, 10% infill
42 min
1 plate
4.8(5)
Click to see more

Open in Bambu Studio
Boost
821
1984
140
90
1.6 k
830
Released

Description

Bring festive charm to your space with these small and cute 3D-printed Christmas trees. Perfect for decorating desks, shelves, or holiday table settings, these mini trees capture the spirit of the season in a compact, stylish design.

  • Customizable: Easy to print and or personalize with your own holiday flair by using different filament colours.
  • Perfect Gift: A thoughtful, handmade present for friends, family, or colleagues.

Whether you're adding a festive touch to your home or creating delightful holiday gifts, these 3D models make Christmas decorating fun and creative. Download your design and print your own miniature Christmas wonderland today! 🎄

 

Available in two sizes:

Small (S): 20mm in height

Large (L): 30mm in height

 

Third profile w/o AMS:

Mix of both sizes printed in a single colour

 

Filaments used in the pictures:

White: Matte white PLA | Bambu

Yellow: Matte yellow PLA | Bambu

Brown: Matte brown PLA | Bambu

Red: Matte red PLA | Bambu

Blue: Basic blue PLA | Bambu

Green: Basic green PLA | Bambu

 

Check out my other mini's:

Mini Christmas cracker & party hat
Mini Christmas angels
Mini gingerbread man

Comment & Rating (140)

Please fill in your opinion
(0/5000)

Print Profile
Mix of sizes | NO AMS | 0.08mm layer, 2 walls, 15% infill
it is cute, but I am having hard time getting support off. xD
The designer has replied
1
Reply
Not on this print specifically, but after i had trouble with supports not coming off in the past, i read to change the settings on it. Specifically, select the snug style, and change the Top Z Distance to AT LEAST .3mm. I've been using .37 and supports come off very easily.
2
Reply
Thanks for the feedback! I've gone ahead and updated all of the profiles using the suggested settings to make removing the supports easier :)
3
Reply
thanks for the update, I printer another batch, support came off much easier than before.
1
Reply
Boosted
Awesome!
The designer has replied
0
Reply
Really like the gold you used, which filament is it?
0
Reply
Boosted
Replying to @mike.stl :
R3D PLA pro silk gold
0
Reply
Print Profile
Mix of sizes | NO AMS | 0.08mm layer, 2 walls, 15% infill
Very nice. The supports were removed fine!
The designer has replied
0
Reply
Turned out very nice! glad you like them :)
1
Reply
Print Profile
Mix of sizes | NO AMS | 0.08mm layer, 2 walls, 15% infill
Very cute, but a bit tricky to remove the support on such a small piece
The designer has replied
Show original
0
Reply
Turned out nicely! Like the filament you chose, very much Christmas themed :)
0
Reply
Print Profile
Mix of sizes | NO AMS | 0.08mm layer, 2 walls, 15% infill
worked great!
0
Reply
Print Profile
Four trees (L) | AMS | 0.08mm layer, 2 walls, 15% infill
Great profile but some support optimization can be done. Changed support style to tree hybrid otherwise the slicer was printing some of the support mid air... (check from layer 17, some weird lines appears in the support). Also changed top z distance to 0.2mm. With those settings I could just use my fingernail to remove the support from the tree and just had to jiggle it to extract the trunk. The print is flawless. Used Bambu mistletoe pla, polymaker army brown, some red and kexcelled silk gold
0
Reply
Print Profile
Four trees (L) | AMS | 0.08mm layer, 2 walls, 15% infill
I love them :) will be printing a bunch out at Christmas and putting them at my coworkers desks :)
0
Reply
Print Profile
NO AMS DUAL COLOUR - 4x Small - READ DESCRIPTION
used solid green to use up last of filament. love them
0
Reply
Print Profile
Six Trees (S) | AMS | 0.08mm layer, 2 walls, 15% infill
printed 30 and can't wait to put them out at the office
0
Reply
Print Profile
Mix of sizes | NO AMS | 0.08mm layer, 2 walls, 15% infill
Easy to print and ideal for use as decoration!
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.