Multiboard Universal Build Plate Holder

Multiboard Universal Build Plate Holder

Boost
29
206
19

Print Profile(1)

All
A1
P1S
P1P
X1 Carbon
X1E
X1
A1 mini

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
3.8 h
1 plate
4.8(12)

Open in Bambu Studio
Boost
29
206
19
17
151
88
Released

Description

I wanted a build plate holder that could handle multiple plates, and mount on multiboard without feeling like it would pull off if I pulled out a plate badly.

Features of this holder:

  • Five slots, 1.2mm deep. Will hold even my thickest build plate.
  • Two pieces, place them at whatever width you need. The slots are 40mm wide on each side, so plenty of support if your width is not “perfect” on a 25mm increment.
  • Two pieces are much easier to print, will fit easily on small printers like the Prusa Mini or Bambu Mini.
  • Each slot is staggered by 5mm vertically, making it easier to see and pull the plate you want.
  • Mounts using four Large multiboard bolts, two on each side of the holder. A 9mm bolt should be sufficient, but I use 13mm because I'm paranoid. The holder is rock-solid on the multiboard.

Note: You will need to print four Large Multiboard Bolts 9mm or 13mm, these are not included in the print files. They can be found at https://www.multiboard.io/parts-library/threads

Comment & Rating (19)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 2 walls, 15% infill
Thx for sharing, fits perfect
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
great idea, but for the plates to be offset, one side needs to slant the other direction. otherwise I can fit one in the back slot and the front slot can’t hold a plate because it’s too wide a gap.
0
Reply
Instead of using the version in the 3MF file, download the STL version. The STL is different than the 3MF, and should do what you want.
0
Reply
The link to the screws is no longer working here is the direct link to the matching screws: https://thangs.com/search/%22MB38%22%20creator%3A%22Keep%20Making%22?scope=thangs&;view=grid
The designer has replied
Show original
0
Reply
Thank you, fixed the link
0
Reply
I just got my multiboard and am looking to print this. How do I attach it to the multiboard?
0
Reply
Boosted
Nice and compact, yet fits so many plates! Love it for my A1 mini plates, and it works great!
0
Reply
Good design. Good explenation. Like.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Good design and print worked out fine. Like
0
Reply
Excellent design
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Very nice solution. One small suggestion: It would be nice if the Multiboard holes directly next to the holders were not covered by the plate holder.
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply