Tealight Christmas Candle (HoHoHo!)lder

Feel the magic of Christmas with this beautiful tealight candle holder.

Santa's sleigh and his famous "HoHoHo!" in a unique combination, where you can insert a tealight into the letters "o".

The inscription is slightly bent to point it towards you.

When assembled, the model measures 28 cm wide by 13 cm high. Compatible with tea lights with a maximum diameter of 39 mm.

It is of course possible to print it in one or 4 different colors. Choose your own combination.

You don't need AMS, but it makes printing much easier. You can change the color manually.
Plate 1: Layer 11 (2.20)
Plate 2: Layer 16 (3.20)

Plate 1 Base

Due to the size of the base (28cm), it should be printed diagonally on the table, as in a profile.

Plate 2 with Santa' sleigh

Print the bow with reindeer and Santa's sleigh flat as in profile. It is important that the table is clean and degreased. Due to the delicate elements, you should wait until the print moves away from the table by itself. Don't force it.

If you have a problem with the first layer on platen two, try reducing the printing speed of first layer.

After printing:
Push the bow with Santa's sleigh into the prepared holes in the base.
They have a slight gap, so you need to use light force, but be careful not to break the model.