The Mac Vase - A Botany Chic Creation - Home Decor by BotanyChic

BotanyChic

Household>Decor

This model is created by Make My Vase

Make Your Model

Print Profile(12)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

Scaled A1Mini H175mm Vase Mode .2mm layer, 1 wall, 0% infill

Designer

3.1 h

1 plate

4.9(19)

height 150mm - vase mode - water proof 0.2mm layer, 1 walls

Designer

2.4 h

1 plate

4.9(42)

height 180mm - vase mode - 0.2mm layer, 1 walls, 0% infill

Designer

18.1 h

1 plate

5.0(2)

height 200mm - vase mode - 0.2mm layer, 1 walls, 0% infill

Designer

3.8 h

1 plate

4.9(37)

Click to see more

Open in Bambu Studio

Boost

2470

6094

536

400

4.3 k

2.1 k

Released

Description

Boost Me (for free)

If you like this design and want to support me - please boost this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Happy printing

The Mac Vase - A Botany Chic Creation - Home Decor

Membership

The easiest way to gain access to a comprehensive commercial license! - Your support means the world!

Join

For each of my vases, you will find two types of profiles: Vase Mode and Sturdy

Vase in a modern style for everyone

No supports needed. Easy print. Can be scaled up or down however you like.

Check-out also my latest creation:

The Felicia & Rossella Vase - A Botany Chic Vase by BotanyChic - MakerWorld

If you enjoy this model please consider to buy me a coffe

Check my other creation here: BotanyChic | Published - MakerWorld

Check out this:

Venus Planter - Homee Creations by Homee - MakerWorld

https://makerworld.com/en/models/988693#profileId-963846

and this:

https://makerworld.com/en/models/988186#profileId-963269

scandinavian style furniture

valentine's day

valentines day

Bill of Materials

Bambu Filaments

Blue Gray

A00-B1-1.75-1000-SPLFREE

19.99 USD

× 1

Charcoal

A01-K1-1.75-1000-SPLFREE

19.99 USD

× 1

Ash Gray

A01-D3-1.75-1000-SPLFREE

19.99 USD

× 1

Latte Brown

A01-N1-1.75-1000-SPLFREE

19.99 USD

× 1

Dark Red

A01-R4-1.75-1000-SPLFREE

19.99 USD

× 1

Buy Now

Download BOM

Comment & Rating (536)

@lukasgustav

Boosted

Print Profile

height 200mm - sturdy - 0.2mm layer, 2 walls, 15% infill

Beautiful model! thanks for sharing! I changed the profile from 2 to 4 walls to give it some extra weight and strength, printing time and filament was only slightly more. printed in eSun PLA+ magenta

@BotanyChic

Looks very Nice! Thank you. don’t forget to boost my model !!

@lukasgustav

Boosted

Replying to @BotanyChic :

already did boost :)

@finleykelly

I would have much preferred 4mm as 2mm is a bit flimsy and moveable

@davschn

Print Profile

height 150mm - vase mode - water proof 0.2mm layer, 1 wall

nice design, got some issues at the end, dunno why

@BotanyChic

Try to don't touch the profile that I made and leave the speed as is. BTW Thank you, don’t forget to boost my model.

@davschn

Replying to @BotanyChic :

hm i did not change anything. do you think it is speed related?

@BotanyChic

Replying to @davschn :

maybe.. I have received tons of positive feedbacks on this model. Which printer are you using?

@Nik09

Boosted

Print Profile

height 150mm - vase mode - 0.2mm layer, 1 walls, 0% infill

perfekter Druck

@BotanyChic

Thank you, don’t forget to boost my model

@HBBushcraft

Which Filaments did you use?

@Nik09

Boosted

Replying to @HBBushcraft :

Pla von jayo

@Sacrent

Boosted

Print Profile

height 150mm - vase mode - water proof 0.2mm layer, 1 wall

Very nice Print 😁

@BotanyChic

Amazing !! Thank you, don’t forget to boost my model

@Sacrent

Boosted

Replying to @BotanyChic :

Double Boost ❤️

@BotanyChic

Replying to @Sacrent :

thank you!

@jonathan.mortes

Boosted

Print Profile

height 150mm - vase mode - 0.2mm layer, 1 walls, 0% infill

genial

@BotanyChic

Sorry! I just changed the profile model with the correct one.

@BotanyChic

Thank you, don’t forget to boost my model.

@user_1979933654

Vase mode in Bambu Lab PLA Blue Gray. What went wrong here?

Show original

@user_2301763330

Increase layer width. 0.4 to 0.6 (max 0.8)

@user_1979933654

Replying to @user_2301763330 :

Thanks, i will try

@dkantz5

Boosted

Print Profile

height 250mm - vase mode - 0.2mm layer, 1 walls, 0% infill

250 came out wonderfully

@BotanyChic

Thank you, don’t forget to boost my model.

@Smiddy1987

Print Profile

height 200mm - vase mode - 0.2mm layer, 1 walls, 0% infill

@BotanyChic

Thank you, don’t forget to boost my model.

@user_342782400

Hi! may I ask which filament you used? That green is lovely!

@Smiddy1987

Replying to @user_342782400 :

pla matte DARK Green from bambulab

@Chyl

Boosted

Print Profile

height 200mm - vase mode - 0.2mm layer, 1 walls, 0% infill

very nice Print. Elego Sakura Pink Matte

@BotanyChic

Thank you, don’t forget to boost my model.

@nahyanasif90

Boosted

The print profile is no longer public

Printed in my X1C with Bambulab’s Denim Blue PLA-CF flawlessly - surprisingly sturdy despite vase mode - 150 mm is very decent sized. Looks absolutely amazing. Thank you so much for sharing this file with us !

@BotanyChic

Glad to hear that. thank you!

@BotanyChic

Thank you, don’t forget to boost my model

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License