HueForge Snake 100mm Diameter
HueForge Snake 100mm Diameter
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm
Filaments Used:
ABS Hi-tech ABS-5 Black Transmission Distance: 1
ABS AddTech Red Transmission Distance: 2.5
ABS AddTech Yellow Transmission Distance: 2.5
ABS Hi-tech ABS-6 White Transmission Distance: 2
ABS Hi-tech ABS-5 Black Transmission Distance: 1
ABS AddTech Green Transmission Distance: 3
ABS Hi-tech ABS-6 White Transmission Distance: 2
Swap Instructions:
Start with Black
At layer #7 (0.48mm) swap to Red
At layer #12 (0.68mm) swap to Yellow
At layer #21 (1.04mm) swap to White
At layer #27 (1.28mm) swap to Black
At layer #33 (1.52mm) swap to Green
At layer #44 (1.96mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)