Polymaker Adapter Spool Weight - Bambu Edition

Polymaker Adapter Spool Weight - Bambu Edition

Boost
30
34
7

Print Profile(6)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 4 walls, 80% infill (Full)
0.2mm layer, 4 walls, 80% infill (Full)
Designer
2.6 h
1 plate
4.8(4)

No Logo Full-0.2mm layer, 4 walls, 80% infill
No Logo Full-0.2mm layer, 4 walls, 80% infill
Designer
2.4 h
1 plate
5.0(1)

0.2mm layer, 4 walls, 80% infill (Main Body)
0.2mm layer, 4 walls, 80% infill (Main Body)
Designer
2.1 h
1 plate

0.2mm layer, 4 walls, 80% infill (Cap)
0.2mm layer, 4 walls, 80% infill (Cap)
Designer
40 min
1 plate
Click to see more

Boost
30
34
7
0
81
23
Released

Description

Polymaker Adapter Spool Weight - Bambu Edition


Are you tired of your spool hopping around when its about to run out? If you said yes, this spool weight is for you. I created this for those of us who have spools that hop around or simply will not rewind because they get too light. This was purpose built to work with the Polymaker Spool Adapter found here. When printed at the recommended 80% infill, 0.2mm layer height, 4 walls, 4 Top and Bottom, it should be around 163g in weight.

Example was printed with Polymaker PolyTerra Charcoal Black and Bambu Green

Note: There is a no logo version now in the raw files and in the profiles

Disclaimer: I am in no way affiliated with Bambu Lab and only used the logo as a way to show appreciation for such a wonderful company.

Comment & Rating (7)

Please fill in your opinion
(0/5000)

Print Profile
No Logo Full-0.2mm layer, 4 walls, 80% infill
perfect thanks !
0
Reply
Print Profile
0.2mm layer, 4 walls, 80% infill (Full)
works great… except slightly to wide to fit through center hole of Polymaker “official” cardboard spool ring
The designer has replied
0
Reply
Its not supposed to loose, but it also shouldn't be too tight. I printed 20 of these with PLA, PLA Pro and Polyterra PLA. All Polymaker filaments. Can I ask what filaments you used and if you use the profile settings? I don't want to assume.
0
Reply
I also used Polymaker filaments with your profile…although I used a different printer for my rings and may be a little oversized, IDK?
0
Reply
Print Profile
0.2mm layer, 4 walls, 80% infill (Full)
really nice. thanks.
0
Reply
Print Profile
0.2mm layer, 4 walls, 80% infill (Full)
0
Reply
Print Profile
0.2mm layer, 4 walls, 80% infill (Full)
0
Reply
No more