Cascade Card Wallet V3 with a large Cash Tray

Remixed by
Copyright Claim

Cascade Card Wallet V3 with a large Cash Tray

Remixed by
Boost
46
110
22

Print Profile(1)

All
A1
P1S
P1P
X1 Carbon
X1E
X1
A1 mini

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
2.3 h
2 plates
4.8(19)

Open in Bambu Studio
Boost
46
110
22
16
201
129
Released

Description

Here are the key points to this slid card wallet with cash tray:

  1. I made this wallet a little thicker and wider to accommodate a cash tray.
  2. This slider version can accommodate 4 cards, and a large cash tray.
  3. For better comfortable grip, I recommend applying hot glue on the slider handle. It can easily be reapplied if it falls off over time with use.  For a quality hot glue gun shop here.    https://amzn.to/3O9ir3Y

This model still demands a highly precise printer, as the internal mechanism is separated from the wall by a mere 0.2 mm.

I recommend using stick glue on the plate for a firm foundation to counter quality issues:    https://amzn.to/3Z60SIj

Printing :

  • Nozzle size : 0.4 mm
  • Layer height : 0.2 mm
  • PLA and PETG both work
  • No support needed
  • The STL is already oriented, the model is printed upright

Here are the PLA I used for this model…

Black PLA Star stuff:    https://amzn.to/4hJslqr

White PLA+:    https://amzn.to/4etonzi

  

Comment & Rating (22)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 2 walls, 15% infill
Creative design. Wish it was a littler wider.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed W/ PETG HF on A1 mini *on silent* with the printing settings in the description. I added some text on the handle side for a personal touch:) the initial print was a bit stringy, but after the cool-down and a quick clean it mostly went away (most of this seems to be due to the text I added and not the model itself). I would imagine sanding would make this a perfect finish. Very surprised with this and appreciate the bigger cash tray. Thank you!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
the mechanism is smooth and fun to use
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
This printed really well in PETG-HF. Just printed in the textured plate, nothing special needed. I used a knife to help wiggle it free in the round thing in the back.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Not perfect but functional
Show original
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
nice idea. printed in pla. profile great. can hold money drawer and 3 cards. not bad. cards are secure
0
Reply
Works great. Would be nice to have rebate in the lever to add a TPU grip rather than hot glue
The designer has replied
0
Reply
You're absolutely right. When I made the wallet, I had no TPU so that wasnt even on my mind. Ill fix it in the future...
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
the hinge works surprisingly well and this had become my main
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
larger than the v2 and the cash drawer is a little slim so you can't fit full size bills but a few coins should work
0
Reply
I use this wallet everyday and it’s like a fidget as well. Let me know how you guys like it.
0
Reply

This remix is based on

This source model was used for remixing/sharing before its license was restricted.
Cascade card wallet V2

License

This user content is licensed under a
Creative Commons Attribution-Noncommercial