Headphone Desk Mount by SwarSoup

SwarSoup

Tools>Organizers

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 5 walls, 30% infill

Designer

1.3 h

1 plate

4.6(10)

Open in Bambu Studio

Boost

197

150

Released

Description

A basic headphone table mount. It's EXTREMELY stable (with the grip pads), and I'm never worried about knocking the model off the table (I've tried). This is an older version of my dual mount, but still great if you only want to mount one headphone.

TLDR:

Sturdy headphone mount
Meant for a thick table (36 - 45mm without a foam pad)
- Perfect for Ikea Karlby countertop
Recommend using a foam pad sticker (or anything grippy) for maximum grip to the table
- Stick it to the model where it makes contact with the top of the table.
- Ideally, use an adhesive to stick it to the model.
Prefer PETG (PETG-HF works flawlessly!) over PLA because it flexes a bit more, allowing for a tighter screwing capability.
You may need one small tree support for the screw hole.

Comment & Rating (18)

@user_2097678733

Print Profile

0.2mm layer, 5 walls, 30% infill

wonderful

The designer has replied

@swarsoup

yay!!! :)

@user_470616250

Would it be better to make longer length of screw, cause my desk is way thinner than modeling...

The designer has replied

@GioMigliore

Boosted

I join the request, is it possible to have a longer life?

Show original

@swarsoup

Yes of course. Will upload some variations today!

@swarsoup

Replying to @swarsoup :

Uploaded a screw that is 1 inch longer (.step file). Click on "download stl/cad files" -> "long screw". Sorry I didn't have time to slice and test it. But just use the settings from the main 3mf file.

(Edited)

@jacob_g

Print Profile

0.2mm layer, 5 walls, 30% infill

Printed perfectly! Screw threaded easily with no post processing.

The designer has replied

@swarsoup

Glad you liked it. This was one of my first designs and uploads - Much required confidence boost :) Thanks PS: Updated the model slicer file to be stronger + added supports

(Edited)

@user_2194218032

Print Profile

0.2mm layer, 5 walls, 30% infill

Nice printing characteristics. Useful design.

@user_1425031231

Print Profile

0.2mm layer, 5 walls, 30% infill

The screw is quite short For a 20mm tabletop I would need to design and press-fit an adapter

Show original

@user_1191997543

Boosted

Print Profile

0.2mm layer, 5 walls, 30% infill

@Gnashernoob42

Print Profile

0.2mm layer, 5 walls, 30% infill

@user_2068396153

Print Profile

0.2mm layer, 5 walls, 30% infill

The designer has replied

@swarsoup

Yes that is the whole point of the design and the recommended table thickness is mentioned in the description. > "Meant for a thick table (36 - 45mm without a foam pad)" Because people liked this model, I also uploaded a longer screw that would work for thinner desks, but I'm sure there are other models out there that would be better for your use case!