Secret Hitler Board Game by JungyBrungy

JungyBrungy

Toys & Games>Board Games

IP Report

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

H2D

A1 mini

0.16mm layer, 2 walls, 15% infill

Designer

55.8 h

12 plates

4.9(53)

A1 Mini compatible, No Box

Designer

48.9 h

16 plates

5.0(6)

Redesigned Box And Lid Without Supports and Other Additions

41 h

12 plates

4.9(10)

X1C optimized

60.6 h

18 plates

5.0(1)

Open in Bambu Studio

Boost

1705

4087

223

316

1.9 k

425

Released

Description

I wanted a 3D printable version of the Secret Hitler board game that stayed true to the original design, so I created this set using the game’s original artwork, with all components fitting neatly into a compact box.

Each card has front and back artwork and there are 10 unique secret role cards. In the original game there are three different Fascist boards each used for different player counts, but for my version I designed two add-on modifier pieces for the Fascist board, which you can easily place on top the board for 7-8 and 9-10 player games.

I've also created the Secret Hitler XL Communist Expansion! Check it out here: https://makerworld.com/en/models/1052392#profileId-1039379

Contents:

Liberal Board
- Bambu PLA Matte Dark Blue
- Bambu PLA Basic Cyan
- Creality PLA Silk Silver
Fascist Board & 7-10 Player Modifiers
- Bambu PLA Matte Scarlet Red
- Elegoo PLA Pro Burgundy Red
- Creality PLA Silk Gold
10 Unique Secret Roll Cards (3 Fascists, 6 Liberals, 1 Hitler)
- Overture PLA Matte Light Brown
- Bambu PLA Basic Cyan (Liberals)
- Bambu PLA Matte Scarlet Red (Fascists & Hitler)
Liberal Policy Card (6) & Party Membership Card (6)
- Overture PLA Matte Light Brown
- Bambu PLA Basic Cyan
Fascist Policy Card (11) & Party Membership Card (4)
- Overture PLA Matte Light Brown
- Bambu PLA Matte Scarlet Red
Ja! Ballot Card (10)
- Overture PLA Matte Light Brown
- Bambu PLA Matte Dark Blue
Nein Ballot Card (10)
- Overture PLA Matte Light Brown
- Bambu PLA Matte Dark Red
President & Chancellor Placards
- Bambu PLA Matte Dark Brown
- Bambu PLA Basic Jade White
Draw and Discard Pile Placeholders
- Overture PLA Matte Light Brown
Election Tracker
- Bambu PLA Matte Dark Blue
Game Box & Lid
- Bambu PLA Matte Dark Red

I recommend using matte filaments! The thin, dual-sided nature of the cards means that it is likely you will be able to see through to what is on the other side using standard filaments, the opacity of matte filaments are able to prevent this. I used Overture Matte PLA Light Brown (pictured) and achieved full opacity.

A clean build plate is a must for adhesion. The designs have a lot of fine details, so make sure to wash your build plate with dish soap and hot water before each print.

For highest detail use a 0.2 mm nozzle, but everything can be safely printed with a 0.4 mm nozzle. (Pictured printed with 0.4mm nozzle: Ballot cards, Secret Role cards, Party Membership cards, President and Chancellor placards, Discard & Draw placeholders, and the Game Box. Pictured printed with 0.2mm nozzle: Liberal board, Fascist board, Fascist board mods, and Policy cards.)

Updates:

1/28/2025 - Improved layer settings for better coloring on the cards
1/6/2025 - Removed black base to the boards to solve color bleeding issue
12/2/2024 - Increased tolerance on the placards for easier installation of the legs
12/2/2024 - Updated print profile to add additional holes for magnets on the boards with increased tolerance

Magnets - 3mm x 2mm (16 needed):

https://www.amazon.com/dp/B0B5GGSK3F?ref=ppx_yo2ov_dt_b_fed_asin_title

Envelopes - 2.25" x 3.5" (10 needed):

https://www.amazon.com/dp/B087D84F2J?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Rules link:

chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://www.secrethitler.com/assets/Secret_Hitler_Rules.pdf

Credit to the creators Goat, Wolf, & Cabbage LLC, designers Max Temkin, Mike Boxleiter, and Tommy Maranges, and illustrator Mackenzie Schubert. All prints made from these files must be for personal use only and cannot be sold.

board games

multicolor

secret hitler

Comment & Rating (223)

@goatwolfcabbage

We love what you've made here! The Secret Hitler Team does have a few questions though. And don't worry, we're not going to ask you to take it down. Please email us at secrethitlergame@gmail.com to discuss! - Maya, Community Manager

@buhbang

edit: finished printing now and the game looks ready to go! looking forward to playing it next week holiday and christmas! thank you for the print!! This model is so awesome! I’m printing it right now and it’s mostly completed but one thing I noticed was that once the storage box was filed with the 4 part boards to the top, it’s really hard to take out without flipping container upside down. is there a way to modify this so it’s easier to take out the contents inside?

(Edited)

The designer has replied

@JungyBrungy

So what works for me is you can push all the boards down in one corner (where the placards are) and they all lift up so you can easily grab them, give that a try and let me know how it is!

@buhbang

ah okay. that does work for me except sometimes the very bottom board doesn’t like to pop up all the way for me to grab. it’s just a minor inconvenience. thank you so much for this model!!

@JungyBrungy

No problem! I'd love to see pictures when you're done!

@DamienBoard

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Excellent model, almos a replica one to one to the real game, need some fix for the black bleeding and the card transparency giving away the roles if you don't use the enveloppe ! And it was kinda a pain to remove the support from the box It's improvable !

@JungyBrungy

Glad you like it! I'm looking for a fix to the black bleeding, if anyone finds anything please let me know! I will be uploading a new print profile without the black on the bottom of the boards soon as a semi-fix

@DamienBoard

Boosted

Replying to @JungyBrungy :

I am only 1 month into 3D printing but i guess you would need to make the black part only on the outer schell and the inner of the board to the red/blue color for that bleeding not to be seen I would gladly try to do that but i need to learn some stuff first (btw how did you paint everything ?)

@JungyBrungy

Replying to @DamienBoard :

I painted everything in BambuStudio, there is a setting in there to paint all the parts with the filament colors you add to the print profile

@user_3497565426

Print Profile

0.16mm layer, 2 walls, 15% infill

it work vary well

@JungyBrungy

I love the color scheme you went with!

@user_3497565426

Replying to @JungyBrungy :

Thanks

@user_445987083

Print Profile

0.16mm layer, 2 walls, 15% infill

@JungyBrungy

Looks great!

@deneilouvdd

Hey man, nice one, how did you manage to make it black and white ? I ll be getting my 3D printer and I want to try this

@trollpirate

Boosted

I have the same question. I don’t have so many colors at my disposal either

@belgradebc

Boosted

I think it turned out wonderfully (although I will be switching policies to white background in the near future). Big thanks to JungyBrungy

The designer has replied

@MakerspaceSRB

Boosted

@JungyBrungy Your work here inspired me to try and create some other games. Could you briefly tell me what software you used to convert the PDF resources to cards?

@JungyBrungy

Replying to @MakerspaceSRB :

I use a combo of things! First I take the pdf and export each page out as jpeg's, then I convert those to .svg files using Adobe's .svg converter (it's free online), then I use a program called Figma (also free) to edit the .svg vectors to be cleaner, and then I import those .svg files into Fusion 360 to 3D model the cards.

@Xaanty

Boosted

@JungyBrungy can you help please? How I can change color i want it similar like second picture with that skull please help i dont want 1 side black and other red

(Edited)

The designer has replied

@JungyBrungy

Looks like you need to reassign your filaments to each color to match each piece. I'm not sure whats in your AMS but in the second image you have it set to A3, A2, A3, A1, so make it the same for the other half of the board

@Xaanty

Boosted

Replying to @JungyBrungy :

Thx, I have 1 Red color and 1 Thermoactive Red its good idea or no? but 1 is darker and 1 lighter idk its good idea?

@JungyBrungy

Replying to @Xaanty :

I've never used thermo active filament before so not sure, but if it's darker I don't see why not

@girardin

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

I love that I can print the entire game! This felt like it took me a pretty long time to print, as I was printing 2 at the same time, but I think it turned out amazing! Thanks for such an awesome print. I played it last night with friends and had the best time!

@JungyBrungy

So happy you like it! The prints look great!

@girardin

Boosted

Replying to @JungyBrungy :

I purchased the exact color filaments you used (on the Black Friday Holiday Sale at BambuLab), and it's so beautiful. Pressing on the President/Chancellor placard side of the box, immediately allows a finger under the boards to remove them from the box, and the box is so beautifully compact and well designed. I love the colors and the use of the magnets to hold the boards together. I initially was sticking Ballot cards in with the Party Membership and Secret Role cards, but found that the spot in the box for Ballot cards had already been thought out, and it wasn't necessary to "stress" the envelopes with 4 cards instead of 2. I've liked and boosted you. Awesome job!

@JungyBrungy

Replying to @girardin :

Thank you so much and I appreciate the glowing review!

@DefinitelyAiden

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Printed great only issue is getting the boards out of the box, I think I would have liked to seen a groove in the box to allow the ability to lift out the boards without tipping everything out.

@JungyBrungy

Something you can try that I've recommended to others to get the boards out easier is to push down on the corner of the boards where the placards are underneath, and then the other side will lift up where you can easily grab them.

@Erik00

I tried to print the first sheet with 100% infill, 0,2 mm nozzle and had issues where you are able to tell if it is red or blue on the other: 1. Since the coloring is not clear cut, you get layers that are not correct with wrong colors that bleeds through. 2. The default profile have 15% infill and purge to infill that might make the bleed more visible? One simple solution might be to make the middle layers black. But would be better to create propper objects. Where did you get the images?

The designer has replied

@JungyBrungy

This is an expected problem with prints that are thin and double sided, a filament with great opacity is required for best results. I used Overture Matte PLA Light Brown and had no issues with bleed through, I highly recommend matte filaments for this. I can definitely remove purge into infill on the profile so thanks for bringing that to my attention, I chose that setting for the boards but can see how it wouldn't be best for the cards.