Scythe Storage Boxes by JungyBrungy

JungyBrungy

Toys & Games>Board Games

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

39.9 h

10 plates

4.7(7)

Open in Bambu Studio

Boost

121

Released

Description

Organize your Scythe board game with these custom storage boxes, designed to fit both the base game and the Invaders From Afar expansion neatly within the original box. Includes dedicated boxes for each of the 7 factions, resource tokens, coin tokens, and cards along with card dividers. All storage boxes fit inside the game box alongside the game board, player mats, faction mats, two power dials, and instruction books.

Contents:

7 Faction boxes
Crimea lid
Nordic lid
Polania lid
Rusviet lid
Saxony lid
Albion lid
Togawa lid
Resources box
Resources lid
Coins box
Cards box
Cards & Coins lid
3 Card dividers (1 medium, 2 large)

*Refer to the last 3 images for how to arrange all contents inside the box

Comment & Rating (24)

@jefflynn

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

The design and sizes are just perfect!! Took forever to print but totally worth it. Thank you so much for making this.

The designer has replied

@JungyBrungy

So glad you like it! Were you able to fit the Wind Gambit pieces in the boxes as well? I dont have the expansion but I see you have the manual in the picture so i'm curious if you added them in

@jefflynn

Boosted

Replying to @JungyBrungy :

Haha no. The wind gambit doesn't fit in the box.

@JungyBrungy

Replying to @jefflynn :

Darn! if I ever get it, maybe I'll have to make a revised storage solution

@dotMorten

Boosted

Really great model! Enjoyed creating this for game night and it was a success. The only thing I ended up redoing was the two boxes for coins and resources. They are really hard to scoop out off, so I added rounded corners in the bottoms so you can easily scoop the resources out (see picture). I printed the lids up-side-down on the textured surface and it gave a really nice surface texture to them. It did mean I needed supports for the embossed logos/text, but that honestly felt better than having to do support for the entire surface of the lid. Also a little neat trick if you don't have dark-red for the star: Print red one layer thick, and then black right under, and it'll come out dark-red.

(Edited)

@RalfvC

Could you share the print profile of at least the boxes with rounded bottoms?

@dotMorten

Boosted

Replying to @RalfvC :

What do you mean the print profile? It was just pretty standard .2mm PLA print

@RalfvC

Replying to @dotMorten :

Or just upload your remixed version that has the rounded corners?

@nullpointer

Print Profile

0.2mm layer, 2 walls, 15% infill

Very nice model, printed for a friend. had to edd brim ears to the corners of the lids, else they would lift up.

@user_2364969498

Print Profile

0.2mm layer, 2 walls, 15% infill

@ssspinball

It doesn't appear the lids are pre-arranged for optimal printing as they are suspended mid-air. Did you flip the lids and them upside down?

The designer has replied

@JungyBrungy

I printed the lids the way they are arranged in the profile with supports. I wanted the faction logos to be printed face up for a better quality appearance than if they were printed upside down, so to do that they had to be arranged this way.

@ssspinball

Replying to @JungyBrungy :

Thanks for the model. I printed the entire set and everything is now neatly in the original box. I modified the lids to print face down (Made the logos flush instead of inset) and it cut 10 hours from the print time. Remix here: https://makerworld.com/en/models/829057

@JungyBrungy

Replying to @ssspinball :

Awesome! I like the look of the flush logos! Now all you need is to add the expansion 😀

@user_4279529209

Boosted

Great model!

@jefflynn

Boosted

omg this is perfect! I was thinking of creating one for myself and found this!

@sanderdb01

Boosted

Best model I’ve ever printed.

@Cysiasty

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

@dotMorten

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.