Balrog Book Nook and Wall Mount by Treddigineer

Treddigineer

Household>Decor

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

H2D

A1 mini

0.2mm layer, 2 walls, 20% infill

Designer

45.9 h

3 plates

4.7(45)

80% scaled + parts, 0.28mm layer, 2 walls, 5% infill

8.7 h

2 plates

4.9(35)

Open in Bambu Studio

Boost

1388

2860

137

215

1.8 k

537

Released

Description

Hi all

This is a book nook horror inspired by Balrog from The lord of the ring

You can find 3 plate so you can chose what version print

The first one consists of 2 pieces (box with face and whip)

The second one consist of 3 pieces all splitted (box, face and whip, i dont like print the face flatten but i leave the choose to you)

The Third is a Wall mount Version

and yes mate, this one have a lot of support, so arm yourself with patience ;D

the dimension is approximately 11x10x21cm you can scale it as you wish

At the back there is a niche where you can place a weight to prevent the piece from falling forward

enjoy

If you wand more exclusive book nook or need a commercial license you can find me on Patreon, link in my bio <3

Boost Me (for free)

If you love what i make, give me a pieces of your hearth <3 is free!

Boost Me (for free)

If you love what i make, give me a pieces of your hearth <3 is free!

lord of the rings art

lord of the rings book mark

lord of the rings bookmark

Comment & Rating (137)

@DLCharette

Print Profile

0.2mm layer, 2 walls, 20% infill

The details are insane! Keep up the great work!

@user_1304995963

paint job looks amazing!! care to share the order of steps you took for it?

@DLCharette

Replying to @user_1304995963 :

Thanks! I started with a yellow/neon yellow wash, dry brushed lightly with red/red neon then dry brush black lightly on top. The whip was printed in orange pla with red dry brush highlights.

@reydeldesigns

Beautiful Brother!!

@cj_markham

painted it in Bambu studio without the tail and only using black, white, red, orange and yellow in the AMS. Took 3 days to print but love the result.

@Thrillhouse

How many color changes was this?

@cj_markham

Replying to @Thrillhouse :

5. white/yellow/orange/red/black, but you could reduce it to 4 by swapping yellow for the white

@dagit.dg

can you upload your painted profile?

@wesk86

Print Profile

0.2mm layer, 2 walls, 20% infill

Printed it without the whip, I'll be painting it as well, awesome print! update: it's been painted!

@Lalogirl

Boosted

Print Profile

0.2mm layer, 2 walls, 20% infill

love it! I did hav a hard time printing (maybe because my printer is a bed slinger or other external factors) but it was worth trying a couple times, because it’s awesome! it looks great next to my Sauron nook! I wound up setting the supports to strong rather than hybrid and had a successful print. I haven’t seen anyone else having issues, so I don’t think it’s of any fault of the model. I cant wait to paint it to show off the details of this print! thank you for making such awesome models!!!

@user_4249640450

Sounds similar to the issue I'm currently facing, might give strong supports a go!

@Lalogirl

Boosted

Replying to @user_4249640450 :

it fixed the issue for me on this one. unfortunately, I’m having the same problem with the alien nook and it’s still failing despite switching to strong supports. idk if I just got lucky, but hopefully it works for you too!! :)

@_donkey_brains_

Very cool model

@smokeless93

Did you print it with black only ?

@_donkey_brains_

No. I edited the model myself and cut it up to print the background flames and the teeth separately. the face is printed in red/black two tone filament.

@wwcenturion

Boosted

Turned out great. Used Gilded Rose Silk PLA from Bambu. Printed with default settings on a X1C. About 12 hrs total. Thanks OP!

@Pameton

Boosted

Print Profile

80% scaled + parts, 0.28mm layer, 2 walls, 5% infill

looks fantastic, I really love it, but the whip is a pain to assemble, it would have been great if it had some sort of notch to hold in the correct position while gluing.

@skyewizard

Boosted

this is a gorgeous print! I printed with Eryone tri-color filament in black-gold-red and it is spectacular!

@CloroxThePotato

Print Profile

0.2mm layer, 2 walls, 20% infill

not finished by any means but from this alone it looks great, only issues I had were that the supports didn't like it a few times so I had to reprint a few times before I had supports that wanted to stay in place, so maybe tweak the supports settings a little if you need to

@Aldania

Boosted

Printed great and was so fun to put together! 10/10

@Aldania

Boosted

Could have painted the whip part better but I got too excited to put it together lol

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.