UPDATE 11/11/24 - Added a horizontal clip

This was created to hang @CanadianGamer's Hueforge prints using the slim version of the friction fit frames to display on grid walls during sales events. It snaps onto the thin wire grids with a 2" spacing and a wire size of 1.8mm. The test print was done in PLA, but PETG should work as well. It was printed at 0.16mm layer height on a 0.4mm nozzle, 15% rectilinear infill.  This was tested on the C&A Home Wire Cube Storage from Amazon.  If this clip doesn't work for the brand you have, I recommend using the remix from Canadian Gamer, which can be found here - https://makerworld.com/en/models/783130#profileId-720506.