Important! The multicolor version is not designed to be printed in separate pieces and later assembled. If you don't have access to a multi-material capable setup (MMU, AMS unit or similar), please avoid printing the multicolor version of the model.

Dimensions (LxWxH)

100 x 63 x 22 mm (100% scale)

Basic information

In a response to the huge success and overwhelmingly positive feedback to one of my very first creations, the Articulated Whale shark, I decided to revisit the idea, and celebrate its success with a fresh and even cuter stylized version of the design. I'm very grateful for your support, and I hope I won't disappoint with my future models. It's been an awesome journey, and I definitely wouldn't be here without you. Thank you!

The shark is print-ready, it comes pre-oriented, and as per usual, doesn't require any additional assembly. Just make sure your print surface is clean, free of any oils, dust or debris to prevent spaghetti disasters, and you're all set.

Files information

All the files have been thoroughly optimized, and the singlecolor stl takes up less space than an average-sized photo, all without compromising the final quality of the print. That means more space for loads of other awesome designs!

I've included 5 files:

• a complete plain stl ready for single color printing, as well as
• 2 multicolor stls for AMS/MMU systems (or similar), named by the color used in the example model
• a slicing-ready .3mf multicolor file for Bambu Studio with preassigned colors and print settings
• a slicing-ready .3mf singlecolor file for Bambu Studio

Material

PLA

Layer height

0,2 mm or lower.

Infill

>15%

Support

None. The model doesn't require any support material.

Scaling

Possible, but keep in mind the accuracy of your setup. If you go too far with your scaling experiments, you might run into issues such as fused segments, or fragile links. If you have a well calibrated setup, you should be able to print the model at up to 75% of the original size without any issues other than loss of definition.

Orientation

Default, laid flat on the belly.

Adhesion aid

Not necessary, the contact area with the buildplate should provide a sufficient grip. However if your print surface suffers from poor adhesion, consider using an adhesive spray, or some other kind of adhesion booster. Using a brim is possible, but not recommended, as it would be too difficult, and inconvenient to remove afterwards.

All resolved past issues with the model files and detailed information about their fixes will be listed in this section. If you're having any problems which aren't on this list, please visit the Known issues section below. If you don't see your problem mentioned there as well, please leave us a message with more details, so that we're able to address it as soon as possible.

There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.

My work is free for personal, non commercial use. If you want to sell, or monetize my models in any other way, please visit my Patreon for more licensing options.