DapRack Labels - Swatch & Name Plates for DapRack by ChadMikeInnis

ChadMikeInnis

Tools>Organizers

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

Label Holders - 0.2mm layer, 2 walls, 15% infill

Designer

1.8 h

4 plates

.4mm Nozzle Blank Labels - 0.2mm layer, 2 walls, 15% infill

Designer

47 min

4 plates

.2mm Nozzle Blank Labels - 0.1mm layer, 4 walls, 15% infill

Designer

2 h

4 plates

Open in Bambu Studio

Boost

Released

Description

Create custom labels or attach standard filament swatches to your DapRack, the adaptable filament rack solution with a modular design and expansive ecosystem! DapRack is 100% 3D printed without the need for supports, and can be expanded both vertically and horizontally to accommodate your growing filament collection, or to display your most beautiful prints.

The 24mm size fits both these custom labels as well as the standard filament swatches, and the larger sizes allow more flexibility for longer names. Create custom text using Bambu Slicer. I recommend a .2mm nozzle and 8pt font for the text labels, although I've included a .4mm profile as well.

Check out other DapRack accessories:

DapRack Shelves: https://makerworld.com/en/models/686147#profileId-614777
DapRack Drawers: https://makerworld.com/en/models/686709#profileId-615378
DapRack Storage Trays: https://makerworld.com/en/models/694009#profileId-622822
DapRack Drawer Storage Trays: https://makerworld.com/en/models/704517#profileId-634327
DapRack X1/P1 Hotend Inserts: https://makerworld.com/en/models/724074#profileId-655153
DapRack Storage Tray Custom Inserts: Coming very soon!

DapRack was designed to be modular. Stay tuned for STEP files to make developing for DapRack ecosystem a breeze.

Pokéballs featured in the photo are from @n3dmel. Check out his MakerWorld profile, Patreon, and more: https://beacons.ai/n3d_mel

Comment & Rating (5)

@MalekAli

Are the labels meant to be glued onto the holder (somehow I doubt it)? When I put the label into the holder it just slips out instantly with zero friction from the side tabs that I thought would hold it in place. It's also possible my particular filament that I used is not finely tuned.

The designer has replied

@ChadMikeInnis

It should fit with friction! the holder is actually designed with an opening of 23.9 mm I believe (definitely smaller than the 24), and the swatch is 24mm. I’ve also tested it with a .2mm nozzle, and .4mm nozzle, and it works with all the filament swatches I’ve gotten from Bambu or printed myself.

@ChadMikeInnis

Are you printing right from the profile? I just printed the 24mm version right from the app in both PETG and PLA and it’s a snug fit. Are you changing anything in the slicer perhaps?

@BringMeMore115

Boosted

chef's kiss

The designer has replied

@ChadMikeInnis

Thank you 😊

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.