North Pole Stamp by Stag 3D

Stag 3D

Household>Festivities

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 10% infill

Designer

48 min

1 plate

4.9(53)

130% SIZE % CUTTED - 0.28mm layer, 2 walls, 5% infill

35 min

1 plate

5.0(8)

Print-in-Place, No Supports, Compatible with A1mini, Optimized Print Settings

38 min

1 plate

4.5(2)

Open in Bambu Studio

Boost

638

1179

738

456

Released

Description

Want to sell Stag3D prints?

Simply head over to patreon.com/Stag3D or follow the link in my bio.

Add a fun festive touch to your child's letter to the North Pole with this stamp.

You'll need an ink pad for the best results, but it is possible to also use paint, although the results wont be as good.

Comment & Rating (80)

@BagelFrette

At first, I was disappointed with the result that didn't show up on the paper at all. The solution is to take sandpaper (240) and sand it a bit. It works like a charm afterwards!

The designer has replied

@Stag3D

Great idea 👍🏼

@user_3913412937

which part did you sand?

@BagelFrette

Replying to @user_3913412937 :

The part where you put the ink, the one with the side that is to be stamped.

@3DStubeMinden

Print Profile

0.2mm layer, 2 walls, 10% infill

Unfortunately that didn't work... nice design but I couldn't successfully test the function

The designer has replied

Show original

@Stag3D

I am sorry to hear that. Examining the photo, it appears the stamp is not evenly inked. Ensure you are using a good ink pad to guarantee consistent coverage.

Show original

@user_1228159770

thats what happened to mine also :( its like the image wasnt out far enough to get the ink or something

@Carlos_Gwn

you should use TPU for something like this :)

@ejwill

Print Profile

130% SIZE % CUTTED - 0.28mm layer, 2 walls, 5% infill

print came out looking great; no problems. Printed with variable layer height using Bambu PLA Basic Red

The designer has replied

@angel4964

Nice color!

@Gmac91264

Print Profile

0.2mm layer, 2 walls, 10% infill

Prints great. Made it a little shorter to not use so much filament.

@FuzzyDragonCosp

Print Profile

Print-in-Place, No Supports, Compatible with A1mini, Optimized Print Settings

printed this on my A1 mini, it failed on the first attempt, but succeeded on the second after I changed the infill to gyroid. I'm looking forward to giving it a try.

The designer has replied

@Jordanlhq

Thank you for the five-star rating!

Show original

@mikes.zone

Print Profile

0.2mm layer, 2 walls, 10% infill

Fun for making Christmas cards or letters

Show original

@Raveman

Print Profile

0.2mm layer, 2 walls, 10% infill

Cute

@user_4280348877

Print Profile

0.2mm layer, 2 walls, 10% infill

very cute

@3DPrintVision

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

It looks all good 😊 Need to test it next 😊 Great model 👍

@ari_m

Print Profile

0.2mm layer, 2 walls, 10% infill

great print and super fun for the kids!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Print Profile(3)

Description

Want to sell Stag3D prints?

Simply head over to patreon.com/Stag3D or follow the link in my bio.

Comment & Rating (80)

License

Related Models

Small star stamps

Super Simple Rod Covers

Fast Stamp Handles

NORTH POLE CHRISTMAS DECOR LICENSE PLATE (SANTA)