IMPORTANT UPDATE: 11/16/24 - I uploaded v1.1 - I made a few adjustments and added small holding tabs. If you are using Bambu Lab's official "AMS Lite Top Mount" I highly recommend using version 1.1 or higher.

___________________________________________________________________________________

I was tired of needing multiple spool adapters to fit all my different sized spools. This is the simple, yet very effective solution I came up with.

This is version two of my Original Prusament Spool Adapter (https://makerworld.com/en/models/219084#profileId-237944). I designed it to fit spools that are either too small to fit the AMS Lite (i.e. Prusament 51mm) or spools that are too BIG (i.e. Geeetech 75mm). It SHOULD be able to fit most spools with center holes between 51mm and 75mm.

Recommended Print Settings: 

• 0.20mm Layer Height
• 4 walls
• 15% Gyroid Infill
• Either PLA or PETG, both work great.

How to:

To use the adapter, simply place the spool onto the shaft, tighten the nut and then slide it onto the AMS Lite. I have a quick demonstration below. 

If you are using Bambu's AMS Lite Top Mount, you may want to try my Upgraded TPU Damper. I found with a more robust damper, the Top Mounted AMS Lite does not shake as violently. It can be found here: https://makerworld.com/en/models/823084#profileId-766391