A Santa Claus trinket to hang from the Christmas tree.
You can play with the X-Y axes as much as you want, to make it smaller or larger. Just be careful not to touch the Z axis, or you'll lose the coloring scheme.
While it's formally composed of four colors, the skin and grey can be replaced with white, and the result should still be good enough.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Black
PLA Grey
PLA White
PLA Skin
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Grey
At layer #21 (1.76mm) swap to White
At layer #28 (2.32mm) swap to Skin
At layer #29 (2.4mm) swap to White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)