HueForge Project: Vintage PinUp Style Christmas Photoshoot.

I hope you all enjoy the Holiday season! Add this one to your list of Christmas Prints to make! I know this time of year that list starts getting pretty big so I posted this beautiful lady early!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 125x125mm in size.

Filaments Used:

PLA BambuLab Basic Black

PLA Inland True Red

PLA Inland Beige

PLA BambuLab Basic Jade White

This print uses 4 unique filaments. End results will vary slightly with different brands and opacities of filament. But please don’t hesitate to try your own brands.

**Experiment with other more subdued colors in place of the red. like darker earthy tone greens, other reds, etc. Or a light gray like most of my other hueforge prints would work good as well**

Swap Instructions: (if you do not have an AMS unit, just add a pause at the following layer numbers and swap to the next color)

Start with Black

At layer #11 swap to Red

At layer #14 swap to Beige

At layer #19 swap to Jade White for the rest.