This is my first HueForge. It shows a beautiful Kingfisher splashing into the water to catch some fish.
I only used matte PLA (4 colors) because I don't like the shiny look of some basic PLA filaments.
The Model is 200x200mm in size. You can scale it down, for example 150x150 or 100x100 but make sure to not touch the Z-height.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments I Used:
PLA JAYO/Sunlu Matte Black Transmission Distance: 0.5
PLA JAYO/Sunlu Matte Blue Transmission Distance: 3
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue
At layer #15 (1.28mm) swap to Ice Blue
At layer #21 (1.76mm) swap to Ivory White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)