Mini Snowflake Ornament Pack by 0atz

0atz

Generative 3D Model>Hueforge & Lithophane

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

AIO Mini Pack - 0.08mm layer, 1 walls, 100% infill

Designer

8.1 h

1 plate

4.8(32)

AIO Pack - No AMS - 0.08mm layer, 1 walls, 100% infill

Designer

7.9 h

1 plate

5.0(1)

NO AMS

7.9 h

1 plate

5.0(3)

Open in Bambu Studio

Boost

571

1139

948

313

Released

Description

Mini Snowflake Ornament Pack

This is a collection of my most popular snowflake ornaments… miniaturized and available as a single download for easy printing! This was a request from a user here and I really thought it was a wonderful idea. I had to remake each ornament in Hueforge to accommodate the smaller size and also ensure detail was still there. You can easily print all 8 snowflakes at the same time, or mix-and-match to your hearts content using your favorite styles.

Each snowflake is sized at 75mm in either width or height using 3 colors of Blue, Morning Blue, and White. You can really have fun with the colors here if you want, for instance Purple, Yellow and White can be a fun combination. These are also a bit thinner at 1.6mm instead of 2mm - details become so small that taller prints can quickly become impossible for .4mm nozzles - however this new 1.6mm thickness ensures you will get a great output.

When slicing, if you get any warnings about floating regions you may safely ignore those!

I DO NOT recommend scaling these smaller than they already are - and if you want them larger, then check out my 150mm snowflake collection (below)

The print profile is setup and ready for an AMS to make this an easy print. If you do not have an AMS, simply remove the color swaps in the slicer and replace with pauses so you can change colors.

Want to sell physical copies of my designs? Head to my Patreon page for a license

Want more ornaments? Check out my mini stocking ornament pack!

Check out my other Christmas prints here

For those who wish to set the print up themselves and not use the setup profile, read below (applies to all snowflake styles):

When assigning colors, be sure to look at the layer # AS WELL as the layer height (in parenthesis next to each layer #). I use height modifiers, so if those 2 don't match up then just use the layer height and you will be good. Hit me up if you have any questions.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Min Depth of 0.48mm

Filaments Used:
PLA Overture Blue Transmission Distance: 1.6
PLA Overture Morning Blue Transmission Distance: 1.9
PLA Overture White Transmission Distance: 4.4

Swap Instructions:
Start with Blue
At layer #6 (0.56mm) swap to Morning Blue
At layer #13 (1.12mm) swap to White for the rest.

Comment & Rating (93)

@user_3514595173

Boosted

Really great Print!

The designer has replied

@0atz

Absolutely beautiful print, thanks for sharing and the boost!!

@i7erminator

Print Profile

AIO Mini Pack - 0.08mm layer, 1 walls, 100% infill

Great Print! Kids loved hanging them on the Christmas Tree! Thanks!

The designer has replied

@0atz

Thanks for sharing and the rating, your prints came out great and it makes me happy to hear your kids enjoyed them! I see you have a CryoGrip... good choice! :)

(Edited)

@SMMY

Print Profile

AIO Mini Pack - 0.08mm layer, 1 walls, 100% infill

beautiful print, i try black silver and white :)

The designer has replied

@0atz

Absolutely beautiful, love the color combo :)

@pretz

Print Profile

AIO Mini Pack - 0.08mm layer, 1 walls, 100% infill

The designer has replied

@0atz

Thanks for the rating and sharing! I love those hooks you are using... any chance you have a link to those?

@Marcello_26

Print Profile

NO AMS

ottimo modello

@Madnessx9

Hey, Snow flakes look fantastic, curious as to how big the hole to hang them is? was looking to potentially mount them on the windows with some 14mm Suction Cups, they have a 5mm shaft with a 5.5mm head. I usually stick some vinyl ones all over the windows each year but that gets wasteful as they cannot be reused and these looks legitimately like an ideal option.

The designer has replied

@0atz

Howdy! Great question - the hole sizes on these range from 2mm to 4mm at the largest, definitely wouldn't fit on a 5.5mm head. The snowflakes are so small, the holes on them are already about as big as they can be unfortunately. As a workaround you could potentially tie a super short string through the snowflake hole, which you could then hang on the suction cup shaft. Might not look as pretty (or maybe it would!) ... if you have any ideas i'm open to it!

@Madnessx9

Replying to @0atz :

Yeah that could work! Will have a look, will have to order a light blue though.

@0atz

Replying to @Madnessx9 :

Excellent! You don't necessarily need light blue, if you have colors you think may work, let me know which ones you have and I can send some example pictures of how they may turn out.

@Gekon3D

Boosted

Print Profile

AIO Mini Pack - 0.08mm layer, 1 walls, 100% infill

Nice but I change the profile. 0.08 is not necessary.

The designer has replied

@0atz

Thanks for the rating, very much appreciated! HueForge mesh and core is built at a specific layer height to achieve proper blending of filaments, so changing from .08 means you won't have the proper blending from one color to the next. But these are so small, I imagine that might be ok - would love to see how yours turned out! :)

@Gekon3D

Boosted

Replying to @0atz :

OK. My is 0.2.

@Treezus

This file is freakin enormous. My gaming computer can barely open it. Any tips because I can't even slice this thing.

The designer has replied

@0atz

That is strange! The file is only 21mb, I just downloaded it again to check - it took about 45 seconds to slice on my old laptop. What slicer are you using and is it up to date? I haven't encountered anyone else mentioning this - perhaps a good old reboot could help?

@Treezus

Replying to @0atz :

I think there is something up with the way my system deals with hueforge. I use bambu studio.

@0atz

Replying to @Treezus :

Very interesting - I also use Bambu Studio and its very fast for most of these hueforge prints. It can be really slow if you use Arachne wall generator method with hueforge (i've had some take 20 minutes to slice). But these snowflakes dont use that method.

@user_3764535803

Print Profile

AIO Mini Pack - 0.08mm layer, 1 walls, 100% infill

Turned out well except one. That could have been me. I'm pretty new at this.

The designer has replied

@0atz

What was wrong with one of them, and which one?

@user_3764535803

Replying to @0atz :

just the top seemed to be frayed and brittle. like I said. it’s probably something I did. I am pretty new at this.

@0atz

Replying to @user_3764535803 :

thanks for sharing, that print was great except for the top like you mentioned. I was just curious incase there was an issue in the model... that could be a symptom of wet filament looking at the area around the top, could also be a bed adhesion issue, or a little of both hard to tell since it was just that area of the print and the rest is really good. may try a good dry session + washing the build plate, just spitballing (and please ignore if that is stuff you already do)

@Nolly

Print Profile

AIO Mini Pack - 0.08mm layer, 1 walls, 100% infill

They are precious

The designer has replied

Show original

@0atz

Thank you for the kind words!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.