Game console Light Up Keycap
Game console Light Up Keycap
Print Profile(1)
Description
Ansi keycap for Mechanical keyboard with north facing LED's
A 0.2mm nozzle is necessary to achieve the fine details
AMS needed for top multicolor part
I print the shine through cap part in transparent petg for best results but feel free to try something else.
push the shine though cap up into the body, its a snug fit. Apply a very small amount of super glue on the locating tab before attaching the top, using a brush is recommended, using too much will cause it too seep out the sides. only use a tiny amount
They still look good on north facing LED keyboards but they just wont get the light up effect
The Shine through cap part is what attaches to the mechanical switch on the keyboard, the fitment is good in my experience, but everyone's printer and filament might be a little bit different.
Make sure you printer/filament is calibrated, if it is too tight or too loose then try adjusting the scale slightly maybe.
Please let me know if there are any problems, and feel free to boost the model if you like it :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)