Bissell Pet Hair Eraser Hand Vacuum Wall Bracket by ByTwoWheels

ByTwoWheels

Tools>Organizers

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 15% infill

Designer

4.5 h

1 plate

5.0(11)

Open in Bambu Studio

Boost

Released

Description

Bissell Pet Hair Eraser Lithium Ion and Vacuum wall storage bracket.

Boost Me (for free)

If you find this item useful, please consider sending me a Boost.

Comment & Rating (30)

@user_721796676

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

It’s perfect! So happy I found this and don’t have to trip over my Dustbuster anymore. I used PLA and followed the advice from another commenter about making adjustments for PLA.

@user_1078621190

Thanks for the rating.

@ladydisdain216

may I ask what adjustments were needed for PLA printing?

@user_721796676

Boosted

Replying to @ladydisdain216 :

Sorry I don’t remember exactly. I read it in a previous comment from another user.

@user_2958916195

I have tried printing twice on a P1S and when I get about 30 layers in, the outer edges become really gnarled and rough. It's as if it's scraping it or printing infill over the walls? I tried switching to gyroid as I initially thought it was the print head bumping into what it just printed but that didn't really make sense as the infill looks clean, it's just all outer edges that show the issue. The model looks great, just trying to figure out how to print it :)

The designer has replied

@user_1078621190

What material are you using? I printed in PETG with no issue and the profile I provided was for PETG. This looks like a nozzle issue perhaps due to temperature or a blockage. If you are using PETG have you tried drying your filament? It could be wet. Layer 30 is also about where the bridging starts. Have you examined the sliced model in Bambu Studio and looked at the temperatures around layer 30? Perhaps try printing in a different material. Hope this helps.

@user_2958916195

Replying to @user_1078621190 :

Thanks so much for the reply. I hadn't noticed that your print profile was for PETG. I went back and compared settings for prints I had been successfully doing to this profile and there were some speed differences that I tweaked, but I think the main issue ended up being the wall generator. Your profile had it set for Classic, whereas everything else I had done had it set to Arachne. I adjusted those settings and reprinted. It came out beautifully. I'm surprised that what I tweaked would've had that much impact coming from PETG to PLA, but it worked great. Thanks again for the help & the model!

@user_1078621190

Replying to @user_2958916195 :

Glad you figured it out!

@user_776881493

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Printed without any issues. Fits perfectly. thanks so much! Very useful

@user_1078621190

Looks good. Thanks for the review and glad it works for you.

@user_1078621190

Replying to @user_1078621190 :

Note that it does go the other way round.

@FourFingers

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Perfectly snug fit for my little hand vacuum and all it's accessories, seems very sturdy and mounting holes are the perfect size for drywall screws

@user_1078621190

Thanks for the review!

@Jsteere212

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Printed great, I have no complaints!

@user_1078621190

Thanks for the review.

@Diffy007

Boosted

sooo excited for this! thank you! everything fits perfect, no more losing the attachments and charging on the floor!

The designer has replied

@user_1078621190

Thanks for the boost. Glad it works well for you.

@user_2796084418

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

@user_1078621190

Thanks for the rating.

@user_1078621190

Thank you for the rating.

@bullethen

Print Profile

0.2mm layer, 3 walls, 15% infill

@user_1078621190

Thanks for the rating.

@user_3755366631

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

@user_1078621190

Thank you for the rating.

@user_4114285636

Print Profile

0.2mm layer, 3 walls, 15% infill

@user_1078621190

Thank you for the rating.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.