thank you for your rating. I know, some of these parts are a little bit tricky to print, but in the end, it works👍

The print worked flawlessly for me. I've printed the parts multiple times, with 0.4mm and 0.2mm nozzles, on textured and smooth plates. Everything's perfect

Thank you for your review Did you achieve the same scale with the 04 nozzle or did you change the size I find it incredible that it works just as well with the 04 nozzle I actually bought a 02 nozzle specifically for such delicate models

Hey Maxi, I didn't scale it. However, I changed the wall generator to Arachne and deactivated the support. Without Arachne, the fenders don't work. The steering wheel even works better with the 0.4 nozzle without support; with support, it's quite fiddly to remove. And I had to print the roof several times, the bridging doesn't always work. But I'm still quite a beginner when it comes to 3D printing. The A1 arrived at Christmas ;-) I'm currently printing with a 0.2 nozzle. If I remember, I'll make comparison pictures. The 0.4 parts are already at my dad's place.

Hey Andreas, That’s fantastic that it works even with the larger 0.4 nozzle despite the small scale. I’m almost a bit astonished that the steering wheel comes out better this way and is even possible without supports. I had the biggest problems getting the support structures off without destruction 😅

Thank you for your positive feedback I'm delighted the model complements your model railway