Cake Containers. by s_branquinho

s_branquinho

Household>Decor

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

14.7 h

4 plates

4.8(4)

Cake Containers (Split Objects).

Designer

10.8 h

5 plates

5.0(1)

Open in Bambu Studio

Boost

168

304

142

Released

Description

I designed these cake containers. Storage space has around 50mm of diameter.

The covers will take a little longer to print cause they are multicolour.

I have added a second profile in case you want to print the parts for the covers separately. This will save you some filament.

If you do this, when you print out the cake (white one), fitting the top pieces of the lid might be a little tricky, however I tested them and they fit, try to place the cream first then remove and find the place for the strawberries , then after you find the correct position you can glue them.

Boost Me (for free)

Comment & Rating (14)

@oldrichie

Boosted

A friend needed a cup to collect cash donations for cakes - thanks to OP splitting the design for me I could print the whole cup and top in pink (matte - which came out like icing) while keeping the other colours. I extended the height of the cup in tinkercad to get it taller without losing the thread tollerance for the lid. Thanks!

(Edited)

The designer has replied

@s_branquinho

thank you 🙏

@hjfaria

Boosted

Printed for the wife, she loved it :D thank you!

@3pi14

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

The designer has replied

@s_branquinho

thank you for the picture . 🙏 looks nice in blue

@oldrichie

Boosted

Hi - any chance you could split the lid objects to print seperately and post the files please?

The designer has replied

@s_branquinho

I've added a new profile.

@oldrichie

Boosted

Replying to @s_branquinho :

thank you so much!

@user_2913961055

Boosted

Just finished printing the small cake (using split objects). Was trying to do something similar and was NOT wanting to learn blender so THANK YOU for publishing this. I've boosted the model in appreciation. That being said, I'll be making a few modifications to add "2026" and another word on the sides so if you happen to have the base files for changing it in Fusion 360, I would be grateful if you could share them!

The designer has replied

@s_branquinho

I've sent you a message.

@user_1400233836

Print Profile

0.2mm layer, 2 walls, 15% infill

@MadAussieMatt

Print Profile

Cake Containers (Split Objects).

Love that it can be assembled

@hjfaria

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

@ForestKira

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(2)

Description

Comment & Rating (14)

License

Related Models

Cake pop holder

happy birthday cake topper

LEGOO toy container AMS/no AMS

Zelda Heart Container - No AMS